Shorelandr SRV55TBB Trailer Brake Rotor or Wheel Stud Replacement
Question:
I have a 2007 Shorelandr SRV55TBB. I am replacing the tires and when I took the lugs off, the studs were damaged. The disc brake hub is in pretty poor condition due to use in a saltwater environment, so I am wondering if I can replace the lug studs and if so, what that part number is, and if you carry a replacement hub assembly with the disc and lug studs installed.
asked by: Mike
Expert Reply:
I have no way of looking up which studs were used on your trailer, but if you can drive out one of the studs and provide the dimensions shown in the provided diagram, I'd be happy to recommend a replacement.
I did find a few specs online for your Shorelandr trailer, it looks like it uses tandem 3500 lb axles which would have an inner L68149 and an outer L44649 wheel bearing and a 5 on 4-1/2 inch wheel bolt pattern. If that's the case, you could use a # KHR10D replacement hub/rotor which uses 1/2 inch wheel studs.
Products Referenced in This Question
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Video: Kodiak Brake Pads Review and Installation
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Review of etrailer by AxleTek Trailer Axles - 3,500 lbs 95 Inch Long Trailer Axle - e83GR
- Q&A: Replacement Rotors and Calipers Needed for a 2003 Mastercraft Single Axle Boat Trailer
- Q&A: Replacement Rotor Hub Needed for a 2004 Four Winns Trailer
- Search Results: l44649
- Search Results: l68149
- Search Results: 165931
- Search Results: 1.375 inner bearing
- Search Results: l68111
- Search Results: spindle nut
- Search Results: l44610
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Parts Needed to Equip 2014 Ford Escape for Towing Small Pop-Up Trailer
- Article: Tips on How To Tow a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Grease Seal to Replace Transcom Seal 22333VB in 5th Wheel Hub
- Q&A: Replacement Grease Seal for Transcom TCM22333TBN
- Q&A: Recommended Trailer Wiring Harness for 2014 Ford Escape
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Flat Towing Package for 2011-2014 Ford F-150