What Replacement Front Ratcheting Arm Do I Need for My Older Yakima HoldUp Bike Rack?

Question

Question:

See attached photo. I am looking to replace this hook arm the one closest to the hitch. Not sure what part to purchase.

asked by: Bud V

0

Expert Reply:

I have a solution for you. For your older-style HoldUp, Yakima only sells the complete tray (platform, arm, front wheel tray/cup, and ratcheting hook). For this part, you will need the Replacement Front Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90197. To install the replacement assembly, you will use your current mounting hardware. Also, you will need to use your current cable lock to switch over to the new assembly. I went ahead and attached a photo to this answer that shows all the pieces that come with the replacement.

expert reply by: Bob C

0

Replacement Front Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90197
(click to enlarge)

Discontinued Older Model of the Yakima HoldUp
(click to enlarge)

Answer 1

I believe what you're speaking of is known as a barrel nut, as shown in the photo I've provided. If this is indeed the part you're needing, Yakima doesn't offer them as a separate replacement part, but you can get the…

view full answer...

Answer 2

That does look like an older version of the Yakima Holdup which I do have an option for you but just the front wheel tray is not available. You'd have to replace the entire rear holder assembly with the part #Y90198 and you'd be set.

view full answer...

Answer 3

To ensure you get the correct replacement cross arm for your Yakima HoldUp bike carrier, we will want to know if you have the newer style black model or the older style gray model. If you have the older gray model, then you will want either the…

view full answer...

Answer 4

To fix your damaged HoldUp (models Y02433, Y02435, Y02434, Y02433-02435), you will need to replace the entire piece with the rear wheel holder assembly #Y90198 you were looking at. I checked with Yakima and they informed me that they do not sell…

view full answer...

Answer 5

I wish there was a way to upgrade your bike rack to fit the larger 29" wheels of your mountain bike but only solution would be a new bike rack like the current Holdup part #Y02443 which can fit bike wheels up to 29 inches in diameter.

view full answer...

Answer 6

We do have a variety of Yakima HoldUp replacement parts for the older models. I'm not sure which exact one you have as the part you gave isn't a standard part number, but if your HoldUp is the 8002434 model made from 2009 - 2012 then some of…

view full answer...

Answer 7

Good news! I spoke to my contact at Yakima and he informed me that the #Y8880229 is compatible with the Forklift to accommoadate wider rimmed bikes. I have linked the replacement strap to this page for your viewing and purchasing convenience.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

What Replacement Front Ratcheting Arm Do I Need for My Older Yakima HoldUp Bike Rack?

Product Page this Question was Asked From

Continue Researching