Replacement Round Bar Spring Bar for Fastway E2 Weight Distribution with 1,000 lb Tongue Weight

Question

Question:

Looking for replacement: 94-00-100c E2 round spring bar 1000 # Tongue Wt, 10000#trailer Wt

asked by: Larry S

1

Helpful Expert Reply:

The replacement round spring bar for the Fastway e2 system with a 1,000 lb tongue weight is the part # FA94-02-1099.

expert reply by: Jameson C

1

Answer 1

Tongue weight is typically between 10% -15% of your trailer's total weight so with the 800 lbs spring bars you're already over their capacity. I recommend upgrading to the 1,000 lbs Round Spring Bar for Fastway e2 Weight Distribution Systems…

view full answer...

Answer 2

You'd be fine to have a weight distribution installed on your trailer as you travel on the hill you described. If anything it might help prevent the trailer from leaning excessively. For a 6,000 lb trailer you'd be looking at a tongue weight…

view full answer...

Answer 3

You can swap just the spring bars of your Fastway Round Bar Weight distribution system to a higher rated setup. For that we have the part #FA94-02-1099 for 1,000 lb tongue weight or the part #FA94-02-0899 for up to 800 lb tongue weight.

view full answer...

Answer 4

The risk of going to a higher than needed spring bar is not that it will bend the trailer frame so much as it is that the ride quality would become harsher. Now if your tongue weight is 650 lbs an 800 lb round bar like the part #FA94-02-0899 would…

view full answer...

Answer 5

The Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW #FA94-02-1099 will be very similar in design to other manufacturers. The diameter of the bars is really consistent between brands at the head, but the size of…

view full answer...

Answer 6

Yes, you can upgrade your Fastway e2 Weight Distribution with 600 lb spring bars to either 800 lb bars or 1,000 lb bars. The right replacement will depend on if you have the Round Bar Fastway e2 #FA94-00-0600 or Trunnion Bar Fastway e2 #FA92-00-0600.…

view full answer...

Answer 7

The most accurate way to spec out a weight distribution system is to positively determine the tongue weight of the RV when it's fully loaded up as you'd typically have it when towing. To that figure, you'd add the weight of anything…

view full answer...

Answer 8

Yes, you can just swap out the bars you have currently with a higher rated 1,000 lb tongue weight set of spring bars to upgrade your system. For that all you need is the part #FA94-02-1099 that you referenced.

view full answer...

Answer 9

That's a very well thought-out question and the correct system will be the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW #EQ37120ET because the ideal system is one in which your total tongue weight…

view full answer...

Answer 10

We do indeed have what you are looking for, which is a replacement round spring bar for a Fastway e2 system with that part number: - Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems #FA94-02-0699 This spring bar is for the e2…

view full answer...

Answer 11

Unless you plan on adding over 150 lbs in the bed of your 2015 Ford F-250 Super Duty I recommend going with the Fastway e2 #FA92-00-0600 as the Tongue Weight (TW) capacity of 600 lbs is a good spot to be at. Even though the e2 #FA92-00-0800 system…

view full answer...

Answer 12

The Fastway e2 Weight Distribution Item #FA94-00-1033 only comes with one set of bars. If your bars say 800lbs then I would go by the bars. If you plan on carrying more than the 800lbs on your 2017 F-150 you can always add higher rated spring bars…

view full answer...