Will the Rhino-Rack Accessory Bars # RR43137B Fit My Pioneer Platform # RR45TB?

Question

Question:

I have a 52102F platform on a Jeep Renegade. I got a roller for it, but the fine print said it only works on the older 4-series platforms. I want to make sure these will work on my setup. Thanks!

asked by: Lance S

1

Helpful Expert Reply:

Yes, I confirmed with Rhino-Rack that the Rhino-Rack Accessory Bars for Pioneer Platform Rack - 48" Long # RR43137B will fit the current generation of your Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 76" Long x 49" Wide # RR45TB. Also, I recommend this size of accessory bars for your platform.

expert reply by: Bob C

1

Answer 1

For your Rhino-Rack Universal Pioneer Platform Rack for Crossbars #RR42115BF, I actually recommend going with the: -Rhino-Rack Accessory Bars for Pioneer Platform Rack #RR43137B, instead of the Full Rail Kit for Rhino-Rack Pioneer Platform Racks…

view full answer...

Answer 2

I confirmed with my contact at Rhino-Rack that you will be able to mount the Rhino-Rack Ski and Snowboard Carrier #RR574 directly onto your Rhino-Rack model 42102BF only if you purchase the Rhino-Rack Accessory Bars for Pioneer Platform Rack -…

view full answer...

Answer 3

I went ahead and contacted Rhino-Rack, and they said that the aero bar accessory bar and the HD accessory bars for the pioneer platform are essentially the same. However, Rhino-Rack did say that they always recommend the aero bar accessory bar over…

view full answer...

Answer 4

You need to add the Rhino Rack Accessory Bars for Pioneer Platforms like with part #RR43137B for a 48 inch option or #RR43232B for 24 so that you could attach the Malone Cargo Box part #MPG901 to the top of it.

view full answer...

Answer 5

For the Rhino Rack Pioneer Platforms like what you have you can have crossbars added to them with the Rhino-Rack Accessory Bars for Pioneer Platform Rack #RR43137B for 48 inch bars or part #RR43138B for 53 inch bars.

view full answer...

Answer 6

A good way to get your tent up on the Pioneer Platform Rack #RR45TB is to get these accessory bars #RR43137B. They will give you adjustability to arrange them where your tent can secure down to. The pioneer platform will not allow you to adjust from…

view full answer...

Answer 7

The difference between the Rhino-Rack Accessory Bars #RR43119B and #RR43137B has to do with the actual crossbar designs. The Heavy-Duty #RR43119B are rectangular bars that are built specifically to carry certain accessories like the Hi-Lift Jack and…

view full answer...

Answer 8

The Rhino-Rack Accessory Bars #RR43120B that you referenced have a width of exactly 2.36 inches. They also have a height of 0.9 inch. I have attached the written installation instructions for the bars below that you might also find helpful.

view full answer...

Answer 9

The Yakima #Y03096 "Fat Cat 6" ski and snowboard carrier, comes with clamp mounts that will attach right to the Rhino-Rack #RR43120B Accessory Bars (53") or the Rhino-Rack #RR43119B (48") without the need for any additional…

view full answer...

Answer 10

With your Rhino-Rack Pioneer Platform Rack with Backbone Mounting System, the accessory bar you may want is the Rhino-Rack Accessory Bars for Pioneer Platform Rack - 54" Long - Heavy-Duty Bars - Qty 2 #RR43120B. If you are concerned about the…

view full answer...

Answer 11

You have it right as the largest platform rack you can install on top of your 2021 Toyota 4Runner is from Rhino-Rack, and is their Pioneer with the Backbone mounting system; the correct fit for your '21 4Runner is the following: - Rhino-Rack…

view full answer...

Answer 12

With the Pioneer Platform roof trays like the #RR42115BF you can have crossbars added to them with the bar adapters like part #RR43137B which would work well with your roof cargo box.

view full answer...

Will the Rhino-Rack Accessory Bars # RR43137B Fit My Pioneer Platform # RR45TB?

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching