Is The 7" Furrion Camera Monitor Compatible With The 4.3" Monitor Furrion RV Back Up Camera System

Question

Question:

Bought a 4.3 camera will a 7 inch pair with the camera

asked by: John

0

Expert Reply:

Yes, the 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR will pair with the camera on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. This will also allow you to add three more cameras to your system since the 7" monitor will allow up to 4 cameras.

You can add on side marker cameras # FCE48TASL to improve visibility and obstacle detection for your RV or camper and/or an extra camera # FCN48TASF above your door or to the front of your camper for easier hookup.

If you wire you cameras to the running lights you can have them on all the time instead of only when in reverse. Most people wire them this way to use as a security camera while at the campground.

expert reply by: Kevin C

0

Answer 1

Yes you can use the AC to DC Adapter for Swift Hitch Wireless Camera System part #PP01 to get your 115 AC power down to the 12V power that you require for your Furrion monitor to work. As an alternative and more permanent type of fix for this you can…

view full answer...

Answer 2

Yes, the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR is 100% compatible with your existing Furrion Vision S Wireless RV Backup Camera System #FOS05TASF and will make for a very nice upgrade. Both the 5" and…

view full answer...

Answer 3

The 2021 GM trucks are really difficult to use the Furrion observation systems with like the part #FOS43TASF since the running light circuit of the truck just doesn't have the voltage/amperage that the camera needs. The Furrion adapters do not…

view full answer...

Answer 4

There are adapters out on the market to convert the 12v cigarette style plug on the Furrion Vision S RV Camera System #FOS43TASF, but there is not a different power cord currently available. We don't currently carry any adapters like this, but…

view full answer...

Answer 5

The Furrion cameras, like what comes in the part #FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.

view full answer...

Answer 8

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 9

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

view full answer...

Answer 10

The #FRCBRKT-BL is actually the mounting bracket but it will still be the Furrion Vision S Wireless RV Backup Camera #FCN48TASF mounted on your bracket. Your camera is compatible with the Replacement 4.3" Monitor for Furrion Vision S Wireless RV…

view full answer...