Furrion Chill RV Air Conditioner System With Black Shrouds

Question

Question:

Can i get this system in black or it only available in white

asked by: Landon H

0

Expert Reply:

Furrion Chill HE RV Air Conditioner System - Multi Zone - 13,500 Btu - White # FR37FJ only comes with the white shrouds but you can purchase the black shrouds separately with part number # FR34PR.

expert reply by: Kevin C

0

Answer 1

Your Furrion Chill Replacement RV Air Conditioner for Furrion Setup - 15,000 Btu - Black #FR86PR is definitely not functioning correctly. We haven't seen this issue yet with that model, but it isn't uncommon that air conditioners when they…

view full answer...

Answer 2

Yes the Furrion heat strip part #FR35SR does fit the ducted Furrion 14.5k BTU AC units like you mentioned having.

view full answer...

Answer 3

You mentioned two different air conditioning units and asked which will match. I think you are asking if you can replace your Furrion FR36SR (DISCONTINUED) with the Furrion #FR58PR. The Furrion FR36SR is a 14,500 BTU Rooftop A/C unit with start…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Furrion Chill RV Air Conditioner System With Black Shrouds

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching