Dimensions of Multi-Fit Motor Home Trailer Hitch, # 82201

Question

Question:

What is the height of the hitch from the frame to the bottom of the receiver?

asked by: Russell W

0

Expert Reply:

The Multi-Fit Motor Home Trailer Hitch, # 82201, has an overall height of 5-5/8". Please note the attached image.

expert reply by: Michael R

0

Measurement
(click to enlarge)

Answer 1

According to Roadmaster the estimated installation time for the BrakeMaster Second RV Kit for Hydraulic Brakes #RM-98300 is 2 hours. This is for someone who is familiar with the product and installation process. If this isn't something you…

view full answer...

Answer 2

The best multi-fit hitch option we offer for your fifth wheel trailer frame that is 71 inches apart that will have the hitch opening the closest to the rear of the trailer is the Curt part #13703. This fits frame rails that are up to 72 inches…

view full answer...

Answer 3

The Draw-Tite Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide #82201 has a maximum tongue weight of 300 lbs. If you have a frame that is shorter then the Draw-Tite #5350 is a great option with a 500 lb tongue weight. If you are…

view full answer...

Answer 4

The bolt holes on the Multi-Fit Motor Home Trailer Hitch part #82201 are spaced 8-1/2" apart front to back. The bolt holes spaced left to right can be adjusted as needed up to 68". I have attached a photo with these measurements for…

view full answer...

Answer 5

Yes, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide, #13703 is for bike racks, cargo carriers, etc. and can be bolted to the vehicle frame or welded on for a no-drill application.

view full answer...

Answer 6

The first dimension you are looking for is 5-5/8 inches. Check out the picture I attached to see. The distance from the front of the crosstube to the furthest point out of the hitch opening is 8-3/4 inches.

view full answer...

Answer 7

The Curt Adjustable Width Trailer Hitch Receiver for RVs part #13703 does have 4-7/8" tall brackets like you mention. Since I cannot recommend to cut down the brackets, I recommend to use an adjustable hitch that attaches to the bottom of the…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we have options available for you to attach a receiver hitch to your 2021 Keystone Raptor 5W Toy Hauler. But before ordering, I suggest you determine if your 5th wheel's frame is rated for this. I suggest contacting your salesperson or the…

view full answer...

Dimensions of Multi-Fit Motor Home Trailer Hitch, # 82201

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching