Shifting A 2019 Jeep Cherokee Out Of Neutral After Flat Towing
Question:
how to shift out of neutral?
asked by: Jim F
Helpful Expert Reply:
According to the owners manual for the 2019 Jeep Cherokee you'll just follow the same steps you took to place it into neutral. I've listed those steps for you below:
1. Bring the vehicle to a complete stop on level ground and shift the transmission to PARK.
2. Turn the engine OFF.
3. Turn the ignition to the ON/RUN mode, but do not start the engine.
4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Using a ballpoint pen or similar object, push and hold the recessed power transfer unit NEUTRAL (N) button
(located by the selector switch) for four seconds. The light behind the NEUTRAL (N) symbol will blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to NEUTRAL (N) is complete.
7. After the shift is completed and the NEUTRAL (N) light stays on, release the NEUTRAL (N) button.
(click to enlarge)
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Video: etrailer Invisible Base Plate Kit Installation - 2019 Jeep Grand Cherokee
- Shop: Base Plate for Tow Bar
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Q&A: Do You Flat Tow With the Ignition On or Off with a 2019 Jeep Grand Cherokee
- Shop: Vehicle Tow Bar Wiring
- Search Results: e98950
- Video: Roadmaster Battery Charge Line Kit Installation - 2019 Jeep Grand Cherokee
- Search Results: 6 way connector
- Video: Pollak Wiring - Trailer Connectors - PK12720 Review
- Video: etrailer Invisible Base Plate Kit Installation - 2018 Jeep Grand Cherokee
- Shop: Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
- Shop: RoadMaster 6-Wire Trailer Connector - Vehicle End
- Shop: Pollak Bracket for Single-Pole Trailer Wiring Socket
- Shop: Roadmaster Battery Charge Line Kit for Towed Vehicles
- Video: Roadmaster Tow Bar Wiring Kit Installation - 2021 Jeep Grand Cherokee
- Search Results: receiver hitch
- Search Results: rm~152
- Shop: Roadmaster Universal Hy-Power Diode Wiring Kit
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Video: Roadmaster 4-Diode Universal Wiring Kit Installation - 2019 Jeep Grand Cherokee
- Video: Roadmaster EZ5 Base Plate Kit Installation - 2019 Jeep Grand Cherokee
- Shop: Trailer Hitch
- Search Results: battery disconnect switch
- Q&A: Do I Need A Battery Disconnect Switch For A 2022 Jeep Grand Cherokee WL
- Q&A: What Gauge Wire Does The Curt USCAR Connector C56229 Use?
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
on Base Plates
