Availability Of Replacement Rail Clamps For Pace Edwards Retractable Hard Tonneau Cover

Question

Question:

I do not want the additional parts you will send me with the purchase of the clamps

asked by: Cecilio D

0

Expert Reply:

We do have the clamps you are wanting, but the Replacement Rail Clamps For Pace Edwards Retractable Hard Tonneau Cover # PE84FR includes the clamps and the mounting hardware. There is currently not a way to order the clamps without the mounting hardware. You would just need to either use it to replace your current hardware, or you can save it for future use.

expert reply by: Samuel C

0

Answer 1

The replacement rail clamps #PE54CV for your Pace Edwards JackRabbit Retractable Hard Tonneau Cover #PE54UV on your 2010 Ford F-250, is not available separately from the kit. This kit does will work with the: -Bedlocker, -Bedlocker with Explorer…

view full answer...

Answer 2

When it comes to the replacement mounting brackets for your 2016 GMC Sierra 1500 I would recommend the Replacement Rail Clamps #PE54CV. It includes all the clamps and mounting hardware.

view full answer...

Answer 3

For your Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWTA10A38 you're just going to need the Replacement Rail Clamps for Pace Edwards Retractable Hard Tonneau Cover #PE84FR.

view full answer...

Answer 4

I attached a picture of what the rail clamps part #311-TRPT1250-1 that you referenced look like installed.

view full answer...

Answer 5

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Availability Of Replacement Rail Clamps For Pace Edwards Retractable Hard Tonneau Cover

Product Page this Question was Asked From

Continue Researching