Replacement Transfer Switch for Parallax ATS501

Question

Question:

Looking to replace a Parrallax ats501 transfer switch. 2009 Holiday Rambler Endeavor. Suggestions?

asked by: Tom M

0

Expert Reply:

Your Parrallax ats501 transfer switch is a 50 amp transfer switch like what the Progressive Dynamics Transfer Switch - Metal Case - 50 Amp # PD52 that you referenced was designed to replace. This would be a solid choice that would work great and be very reliable long term.

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Per the specs of the Shurflo 4008-101-A65 it looks like we have two very good options in the HydroMax RV Fresh Water Pump, #P25201 and the Seaflo Diaphragm Pump for Boats and RVs, #SE58FR. Each are 12VDC pumps and rated at 3 gallons per minute and…

view full answer...

Answer 2

I reached out to my contact at Lippert and he said that both the Keypad 500456 and the 500457 module are obsolete but the Replacement Components Kit #LC359259 will work perfectly to replace both components. This will get your system back up and…

view full answer...

Answer 3

I went out to our warehouse to take a couple measurements on the Fan-Tastic Vent Replacement Lift Arm #FVK8014-05 that you referenced. The distance between the two mounting holes, on center, is right at 3". The overall length on the arm is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Progressive Dynamics Transfer Switch - Metal Case - 50 Amp - 120V/240V #PD52 (Alternatively PD52V) and the PD52DCS/PD52DCSV are both part of the PD52 series but there are some differences. Both share the same voltage rating and current ratings.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

view full answer...

Answer 8

We can certainly point you in the right direction, although I do not have a way to look up exactly what model converter/charger you currently have in your 2017 Winnebago Micro Minnie. If you can provide the brand and model number of your current…

view full answer...

Answer 9

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

view full answer...

Answer 10

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 11

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Replacement Transfer Switch for Parallax ATS501

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching