Determining Correct Weight Distribution Hitch For Towing 2020 Forest River R-Pod W/ 2016 Ford F-150

Question

Question:

I have a 2016 F150, std. cab with an 8foot bed and an 2020 R pod UVW 2979lb with CCC of 828lb. Will this hitch be a good match for truck and trailer?

asked by: Jennifer W

0

Expert Reply:

I would be happy to help!

To determine the correct weight distribution hitch to tow your 2020 Forest River R-Pod with a 3807lb max weight with your 2016 Ford F-150 Standard Cab Long Bed you will need to find your setups total tongue weight. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your truck.

The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the etrailer # e99044 but there are other methods outlined in the included help article.

Since based on the numbers you provided of your trailer it has a max weight of 3807lbs and tongue weight is typically 10-15% of the trailer weight you should expect to see 380-571lbs of tongue weight.

The Fastway e2 Weight Distribution Hitch # FA92-00-0600 works with total tongue weights between 250-600lbs so it would be a great option for your setup. This hitch has built in two point sway control that does a great job of keeping the trailer straight while going down the road.

This hitch does not include a hitch ball so you will need 2" hitch ball # A-90.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The max drop that the Blue Ox Weight distribution system you are considering part #BXW0550 can do is 2 inches so you need a shank that can provide 2 more inches of drop than that. So for that the correct shank is part #BXW4002 and you'd be set.

view full answer...

Answer 2

It's hard to say if you'll need more drop than what the shank you have provides. Is the newer truck taller? If the truck sits at the same height you would be fine without needing additional drop. I attached a help article that details how to…

view full answer...

Answer 3

If your truck and trailer look to be level when adjusting to the 8th chain link with the Blue Ox SwayPro Weight Distribution System #BXW1500 then this isn't a problem. I recommend also taking the trailer out for a short test drive to see how…

view full answer...

Answer 4

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

You do have a very interesting situation. When it comes to aluminum trailers we always defer to the manufacturer whether it is just a utility trailer or an RV trailer like your toy hauler. Aluminum frames can't always withstand the pressure of a…

view full answer...

Determining Correct Weight Distribution Hitch For Towing 2020 Forest River R-Pod W/ 2016 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching