Do Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp 8860061 Fit RailBar Crossbars

Question

Question:

For the Yakima RailBar - is the T-Slot a standard size? Will the - Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp - Qty 2 Item # 8860061 fit?

asked by: Erich

0

Expert Reply:

The answer to both of your questions is indeed yes. Yakima's RailBar crossbars do have the standard size T-slot, so you can absolutely use the replacement T-bolts you mentioned:

- Replacement T-Bolts for Yakima Universal Mount Crossbar Clamp # 8860061

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The hitch I recommend for your 2020 Jeep Cherokee Latitude is the mostly hidden etrailer #e73ZR. Once this hitch is installed the only thing visible will be the hitch opening hanging below the rear bumper. See attached picture. I also attached an…

view full answer...

Answer 4

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 5

Since the inverter would output 12 volts it would be the same running the Therma heat RV tank pad heater part #277-000164 to that as it would be a 12 volt battery.

view full answer...

Answer 6

Both tow bars you referenced will work with the Blue Ox base plate kit part #BLU93FR that you just bought. The biggest difference will be that the Avail part #BX7420 is designed to allow for better maneuverability in tight turns. This is accomplished…

view full answer...

Answer 7

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 8

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...