bing tracking image
Q & A Icon

Brake Controller Wiring Harness to Install Redarc Tow-Pro Brake Controller on 2020 Jeep Gladiator  

Question:

Will this be compatible a 2020 gladiator rubicon with tow package?

0

Expert Reply:

The # RED67FR brake controller wiring harness is compatible with both the # RED44FR Tow-Pro Elite and the # RED24FR Tow-Pro Liberty brake controllers, but the it's not compatible with the Jeep Gladiator. The good news is that we do offer a harness arrangement that would allow either controller to install on your Gladiator.

You'll need both the # 3073-P and the # 331-TPH-017 adapter if you go with the Tow-Pro Elite or if you decide that the lower-cost proportional # RED24FR Liberty model would work better for you, you'll need the # 3073-P harness and the # RED69FR pigtail. To install the Liberty, you'd cut off the black connector on the # 3073-P harness and wire it color for color with the # RED69FR pigtail. The installation of the Tow-Pro Elite would be completely plug and play.

The connector under the dash is located to the left of the steering column near the top of the e-brake pedal.

I'll link to an installation video that you might find helpful.


expert reply by:
0
Mike L
Brake Controller Connector Location 2020 Jeep Gladiator
Brake Controller Connector Location 2020 Jeep Gladiator
(click to enlarge)

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>