bing tracking image
Q & A Icon

Determining Which Replacement Disc Brake Kit Fits 2005 Load Rite Single Axle Boat Trailer  

Question:

Im looking to replace the complete disk brake system on my load rite boat trailer including the actuator, lines.rotors, etc... and was told that if i give you the year and model numbers from my trailer that you could tell me the exact replacement parts/kit i need to do the job before i call you to order. My trailer is a 2005 load rite trailer mod# 20360096RTB MFG DATE: 5/26/2005 GVWR: 4300 LBS Tires: ST225/75D15D Rims: AT 448 KPA Actuator is a Tie Down MODE: 70E Trailer GVWR: 7000 LBS Tongue: 700 LBS Let me know if theres anything else you need. I need one more thing. A complete bearing kit. It is a single axle trailer. Thank you in advance

1

Helpful Expert Reply:

I would be happy to help, but unfortunately we do not have a breakdown of the correct replacement parts for your 2005 Load Rite 20360096RTB.

Instead the first thing your will need to do is remove one of your current hubs and look for the bearing number stamped in the face of the inner and outer bearing as shown in the included picture of the # L44649.

If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.

With the above information I will be able to recommend the correct replacement disc brake kit, and the bearing kit.

Now for an actuator to replace Tie Down Engineering Model 70E I recommend the Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs # DM62VR which is designed for trailers with disc brakes like yours, and has the same 700lb tongue weight/7000lb trailer weight rating as your current actuator.

For replacement brakes lines I recommend the Brake Line Kit # 18SI-BLKIT since your trailer has a single axle.

If you can provide the bearing information mentioned above I would be happy to confirm the rest of the components needed.

I included videos of the products mentioned for you to take a look at.

expert reply by:
1
Samuel C
Bearing Number Stamped In Face of Bearing
Bearing Number Stamped In Face of Bearing
(click to enlarge)
Where To Measure Spindle To Determine Inner and Outer Bearing
Where To Measure Spindle To Determine Inner and Outer Bearing
(click to enlarge)

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>