Reese Universal Base Rail Installation Instructions for 1989 Ford F350 Crew Cab Longbox Dually

Question

Question:

Do you have specific instructions to install this on a 1989 Ford F350 Crew Cab Longbox Dually?

asked by: Steve

1

Helpful Expert Reply:

I spoke to my contact at Reese and he informed me that the correct sheet from the installation instructions of the Reese Universal Base Rail Kit # RP30035 that you referenced would be sheet 11.

The wording on the title of that page is a little confusing, but that sheet applies to every Ford F series truck from 1996 and older.

I attached the installation instructions for this product for you to check out.

expert reply by: Jameson C

1

Answer 1

Unless you'd be interested in going to a different suspension enhancement setup we won't have a solution since all of the gooseneck hitches we offer mount on the outside of the frame rails where your current air bag brackets are. The B and W…

view full answer...

Answer 2

I have a solution for you that allows you to install a high quality gooseneck hitch in the bed of your 1995 Ford 250/350 without requiring you to determine if you have overload springs. The Curt hitch part #C60723 is a fit for both spring styles and…

view full answer...

Answer 3

The Air Lift air spring kit part #AL88298 fits the 1991 Ford F-250 4WD models and will fit with fifth wheel rail brackets. If you check out the linked install instructions you can see a diagram that shows the kit installing with fifth wheel brackets…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Reese Universal Base Rail Installation Instructions for 1989 Ford F350 Crew Cab Longbox Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching