Will the Thule Trac Rac TracONE # TH27000XT Fit a Kamper Rooftop Tent on My 2005 GMC Sierra 2500?

Question

Question:

Would like to mount my 1st Gen.IKAMPER RTT to this system on my 2005 GMC Sierra 2500 6-1/2 ft bed if possible ?? Or recommendations?? Thanks in advance,

asked by: Harry E

1

Helpful Expert Reply:

Your 1st generation Kamper rooftop tent will fit the Thule Trac Rac TracONE Ladder Rack # TH27000XT as long as the the tent is compatible with crossbars that are 4 inches wide x 1-1/2 inches tall. Since the TracONE has a maximum weight capacity of 800 pounds, you will have plenty of weight capacity for your tent on your 2005 GMC Sierra 2500 (6-1/2 ft. bed).

expert reply by: Bob C

1

Answer 1

The Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB that you referenced, which is confirmed to fit your 2014 Ford F-150 Raptor, features a weight capacity of 800 pounds so it is more than capable of supporting the weight of your loaded…

view full answer...

Answer 2

The Thule Quick Grip won't fit around the crossbars for the TracRac SR #TH43002XT-781 on your 2017 Chevy Silverado 1500, however you can upgrade your mounting hardware to the T-Track Mounting Hardware #TH27PQ if your rooftop box has a PowerClick…

view full answer...

Answer 3

The M8 T-bolts in the T-Track Adapter for Thule Cargo Boxes #TH27PQ are 20mm by 27mm. The T-Track Adapter for Thule Cargo Boxes #TH27PQ is actually the replacement for the T-Track Mounting Hardware TH697600. As they have different item numbers they…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...