Trailer Hitch that Fits 2021 Toyota Highlander XSE

Question

Question:

What part number you guys recommend that fits a 2021 Highlander xse?

asked by: Hector R

0

Expert Reply:

We do have a hitch that fits the XSE version of the 2021 Toyota Highlander with the etrailer # e75ZR but the part # C45CR that you referenced does not fit the XSE models.

expert reply by: Jameson C

0

Answer 1

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 2

We had the chance to install the EcoHitch part #EH35VR on a 2022 Toyota Highlander like yours and we found that it fit well and we were able to reinstall a full size spare underneath it so this would be the hitch to go with.

view full answer...

Answer 3

I have attached a picture of the Curt Trailer Hitch Receiver item #C99FR installed on a 2022 Toyota Highlander XLE. This Highlander has the 235/65R/18 wheel and tires. You will be able to see what a tight fit the spare tire has between the hitch…

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver part #e75ZR which is a fit for a 2021 Toyota Highlander does have a hidden design which means the crosstube will not be visible, just the receiver tube. I have attached a photo below of the same hitch with a…

view full answer...

Answer 5

To install the etrailer hitch part #e98844 on your 2019 Toyota Highlander there is not drilling required, but trimming or removal of the underbody panel required for installation. I attached an install video link to show the procedure.

view full answer...

Answer 6

With the proper hitch installed on your 2017 Toyota Highlander like the Draw Tite part #DT84MR the GearSpace 34 Enclosed Cargo Carrier #HGK826 that you referenced would easily not be too heavy for the vehicle. The carrier weighs 189 lbs unloaded and…

view full answer...

Answer 7

The etrailer hitch #e98844 is my recommendation for your 2019 Toyota Highlander. Because of that I think it's the obvious choice for your Highlander. It has an attractive black matte finish, a great towing capacity, and can be used with a weight…

view full answer...

Answer 8

I would be happy to help you decide which hitch receiver you should purchase for your 2021 Toyota Highlander XSE. The Curt item #C99FR you were looking at and the etrailer item #e75ZR are similar hitch receivers and would be great for attaching a…

view full answer...

Answer 9

I do have a hitch receiver recommendation for your 2021 Toyota Highlander XSE. I am partial to the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part #e75ZR. It is a Class III, 2" hitch receiver, that…

view full answer...

Answer 10

Sometimes hitches will get slightly bent during shipping which makes the install a bit more challenging. Normally we recommend getting all of the bolts started at first and then torquing them down. Typically this gives enough play to allow all of the…

view full answer...

Answer 11

Yes the etrailer hitch part #e75ZR does fit your 2020 Toyota Highlander LE model.

view full answer...

Answer 12

We actually have a customer of ours that did successfully install the Curt #C99FR on their 2021 Toyota Highlander with the XSE package, so we do have it listed as fitting. With that being said, they did mention that the exhaust did need to be lowered…

view full answer...

Trailer Hitch that Fits 2021 Toyota Highlander XSE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching