Installing the Roadmaster InvisiBrake Supplemental Braking System on 2021 Jeep Wrangler

Question

Question:

I have a 2021 Jeep Wrangler sport unlimited and I’m curious if there are any creative good ideas on where to mount the control module. I’m thinking under the back seat. Thought I’d ask for comments.

asked by: Robert

1

Helpful Expert Reply:

I suggest installing the Roadmaster InvisiBrake Supplemental Braking System, # RM-8700 per the attached installation video, placing under the drivers seat. This provides an out of the way location while still maintaining ease of access for adjustments and routing of airline and wires.

expert reply by: Michael R

1

Answer 1

Since you are planning on using our etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item #e74ZR, you will want the Roadmaster Direct-Connect Base Plate Kit item #RM-521453-5. These are confirmed to fit the 2023 Jeep…

view full answer...

Answer 2

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR includes an in-coach RF controller that plugs into a 12V outlet in the cab of the motorhome. This unit allows you to have the manual braking override of other brake controllers, and…

view full answer...

Answer 3

The Roadmaster InvisiBrake Supplemental Braking System Item #RM-8700 will drain the battery while towing so the first thing to check is if the battery is reading 12.6 volts or higher. If not then your battery is the issue. The starter could also be…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 7

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 8

Hey Ken, yes the Blue Ox base plate kit part #BLU85CR does have a tab for connecting to safety chains.

view full answer...

Answer 9

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 10

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

view full answer...

Answer 11

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 12

While we do not have a installation video for the Demco Tabless Base Plate Kit #DM77YV, we do have a video for the Roadmaster Direct-Connect Base Plate Kit #RM97RR which is very similar. I have linked the installation video near the bottom of the…

view full answer...

Installing the Roadmaster InvisiBrake Supplemental Braking System on 2021 Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching