Snap Pads for 2020 Newmar Baystar 3014

Question

Question:

Do you have Snap pads for 2020 Newmar Baystar 3014?

asked by: Ron

0

Expert Reply:

If your 2020 Newmar Baystar 3014 has round 8" feet then you will want to use the # SP34FR4 SnapPad. This comes in a quantity of 4. For 9" round jack feet, # SP54FR4, 10" round jack feet is # SP34FR64, and # SP34FR74 for 11-1/2".

expert reply by: Michael R

0

Answer 1

Solar kits and battery chargers are completely separate systems and do not interact with each other aside from making contact with the same battery bank. They do not come into direct contact with one another. The battery charger and solar system both…

view full answer...

Answer 2

The only bike rack cover we offer can only be used in an RV application is the Swagman part #S24FR which would work great with the Hollywood Racks Sport Rider SE part #HLY84FR that you have. You'll have to make sure that the circumference of your…

view full answer...

Answer 3

The snap pads that you need will be determined by the size and shape of your leveling system feet. The SnapPad XTRA Jack Pads #SP54FR4 will fit 9" round feet. The SnapPad EQ Compact Jack Pads #SP24FR4 fit 7" square feet and the SnapPad EQ…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 9

Due to the limits of trailer taillight wiring circuits your Hollywod Racks Safety LED light bar part #HLY54RR is functioning properly. The turn signals and the stoplights are all on the same circuit so the lights are going to all light up when you…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Snap Pads for 2020 Newmar Baystar 3014

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching