How To Lock Blue Ox Tow Bar Arms To Blue Ox Base Plate Kit

Question

Question:

looking for a locking pin for bx4330 to a bx2218 having a hard time

asked by: DAVID M

0

Expert Reply:

The best option we offer to secure a Blue Ox Tow Bar to Blue Ox Base Plates is with the Blue Ox Base-Plate and Receiver Lock Kit part # BX88359. These locks will replace the 1/2" pins which secure the tow bar arms to the base plates. They have dust caps to keep out dirt and debris and they come keyed alike.

expert reply by: Conner L

0

Answer 1

We can certainly help you make sure you get all of the parts you need to flat tow your 2019 Ford F-150; a complete flat towing system consists of base plates, a compatible tow bar, safety cables, supplemental braking and possibly a high/low adapter…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 4

The best SumoSprings for your 2023 Ford Bronco depends on what you are using them for - just to improve your ride a bit on rougher roads, or to help with sag when you are towing or maybe using an accessory. I'll go ahead and list out the options…

view full answer...

Answer 5

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 6

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 7

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 8

Yes, there is. The Roadmaster Direct-Connect Base Plate Kit item #RM97RR will work with the Demco Excali-bar if you use the Demco Tow Bar Adapter Kit for Roadmaster Direct-Connect Base Plates item #DM9523032.

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

To install a 7-Way harness on your 2023 Ford Bronco without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The part #37175 could be used to adapt your 4-way to a 6-way, but you will be required to track down several other components so that you can make the connector functional and to install a brake controller. A better product to get would be the part…

view full answer...

How To Lock Blue Ox Tow Bar Arms To Blue Ox Base Plate Kit

Product Page this Question was Asked From

Continue Researching