MagneTek 950 Converter Charger Recommended Replacement

Question

Question:

Magne Tek model 950 converter charger: this unit was original in our 1996 Airstream. It still works but the humming noise has grown intolerable. What are best options for a DIY replacement?

asked by: Neil G

0

Expert Reply:

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 60 Amps Item # PD9260C is the correct replacement for your MagneTek 950 converter charger. This smart converter charger extends RV battery by fighting sulfation during storage and features a "Charge Wizard" that monitors your RV's batteries and automatically begins charging when needed.

expert reply by: Kevin C

0

Answer 1

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger models, #PD9260C and #PD9160A have a rated power output of 810 watts and 60 amps. The #PD9260C uses the Charge Wizard multistage charging system. Using the built-in Charge…

view full answer...

Answer 2

Yes, the Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 950 that you have currently.

view full answer...

Answer 3

Yes. You can use the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - 12V - 30 Amps #PD9130 to replace your Magnetek series 900 converter as long as you've got lead acid batteries. If you need to charge lithium batteries of…

view full answer...

Answer 4

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 60 Amps Item #PD9260C and PD9260CV are the same exact power converters. The "V" just means it was packaged for retail with a Converter Status Remote…

view full answer...

Answer 5

In order to run both AC outlets and DC lights off shore power in your ATC Enclosed Trailer you will actually need a AC/DC distribution panel, not a power converter. For this, I recommend using Progressive Dynamics Inteli-Power AC/DC Distribution…

view full answer...

Answer 6

The best option we have for you would be the Rack'Em part #RA-28 which is designed to fit the roof of enclosed trailer and provides crossbars that are up to 8-1/2 feet in length but can adjust down to 4 feet.

view full answer...

Answer 7

The Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 940 that you have currently.

view full answer...

Answer 8

You can definitely use this as an upgrade/replacement but you will need to verify the size wiring for charging your battery bank and upgrade that too if needed. If your currently installed converter is the 900 Series Magnetek 950, your DC output for…

view full answer...

Answer 9

Yes the Progressive Dynamics Inteli-Power Converter part #PD9260C would do a really great job keeping the batteries of your Airstream charged. This is a smart charger that will analyze the battery's current condition and give it the best charge…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

MagneTek 950 Converter Charger Recommended Replacement

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching