Which Rhino Rack Pioneer Platform Tray Fits 2018 Toyota 4Runner with Raised Side Rails

Question

Question:

Thank you for the previous answer page that you set up for my 2018 4R Trd Off Road question about Rhino Pioneer Platforms. In that answer, you initially recommended the RR77AB 60 x 49 rack that comes with leg kit for , if I'm correct. I'm still most interested in the RR42115BF "Universal" 58 x 47 that sells for (I currently have this in my cart to purchase). Personally, I prefer the overall dimensions of this one, compared to the 60 x 49. I only need to confirm - Do I understand correctly that this rack mounts to all types of factory cross bars? So, If I have the standard 4Runner cross bars with the rounded aero-profile, will this rack clamp to those cross bars securely?

asked by: Mason F

0

Expert Reply:

Since your 2018 Toyota 4Runner has the raise side rails on the roof the correct custom fit Rhino Rack Pioneer Platform is the part # RR77AB which measures 60 inches by 49 inches.

expert reply by: Jameson C

0

Mason F.

6/23/2021

Thank you for your reply. Please assist me a bit further with the perfect economical setup for my 2018 4Runner TRD OffRoad with factory rails (no cross bars). I want to fit the Pioneer Platform Aluminum - 58" Long x 47" Wide Item # RR42115BF to my 4Runner..... I do not want the 60" x 49" RR77AB platform.. So, I need a kit that will fit the RR42115BF to my factory rails.

Reply

Jameson C.

6/23/2021

To install the Pioneer Platform # RR42115BF on your 2018 Toyota 4Runner with raised side rails you'd just need the SX leg kit part # RRSX100 and you'd be set.

Reply

Mason F.

7/27/2021

Thank you for the previous answer page that you set up for my 2018 4R Trd Off Road question about Rhino Pioneer Platforms. In that answer, you initially recommended the RR77AB 60 x 49 rack that comes with leg kit for , if I'm correct. I'm still most interested in the RR42115BF "Universal" 58 x 47 that sells for (I currently have this in my cart to purchase). Personally, I prefer the overall dimensions of this one, compared to the 60 x 49. I only need to confirm - Do I understand correctly that this rack mounts to all types of factory cross bars? So, If I have the standard 4Runner cross bars with the rounded aero-profile, will this rack clamp to those cross bars securely?

Reply

Jameson C.

7/27/2021

The universal Rhino Rack Platform part # RR42115BF does fit the factory bars of your 2018 Toyota 4Runner.

Reply

Answer 1

The primary difference between the Redarc Smart Start Battery Isolator #331-SBI212 and #331-SBI212D is that the Isolator #331-SBI212D is actually a dual-sensing battery isolator, which means it can transfer power in either direction when connected…

view full answer...

Answer 2

The Prodigy P3 Brake Controller part #90195 that you referenced will eventually go into sleep mode if it is left undisturbed for several minutes. You should note though that the display of the controller would take an incredibly long time to drain a…

view full answer...

Answer 3

The Rhino-Rack Universal Pioneer Platform Rack for Crossbars part #RR42115BF will work out well with the Thule SquareBar Evo Roof Rack System which consist of part #TH712200, part #TH460R and part #THKIT3160. It measures 58-3/16" long x…

view full answer...

Answer 4

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Answer 5

The fit kit has rubberized trim that fits to the contours of your roof and the legs attach to the kit, becoming the weather seal. If you remove the rack when it is not in use you have caps to put on the fit kit to protect the mounting hardware. The…

view full answer...

Answer 6

For your 2018 Mazda CX-5 the 2 inch trailer hitch I would recommend is the Draw Tite part #76138. I recommend this hitch because it has the highest towing capacities available and because only the hitch opening hangs below the rear bumper so it's…

view full answer...

Answer 7

I do have a solution for you that will get a platform on the roof of your vehicle, but first let me answer some of your questions. I will start by informing you that Rhino Rack and Go Rhino are not affiliated companies. This means that the Go Rhino…

view full answer...

Answer 8

The Rhino-Rack Universal Pioneer Platform Rack part #RR42114BF would be an excellent option for a 2019 Mazda CX-5. They work with most standard size crossbars like those from Thule, Yakima, and even most factory crossbars. The spread is also…

view full answer...

Answer 9

The Rhino-Rack Universal Pioneer Platform Rack, part #RR42115BF, is designed to mount to your crossbars with the three included mounting pieces. These pieces are meant to be attached to the rack and crossbars along the two outer slots. The rack can…

view full answer...

Answer 10

Yes, you can mount the Yakima SlimShady Roll-Out Awning #Y36VR to either the rear rail or on the sides of the basket by attaching to the bottom bars of your MegaWarrior rooftop cargo basket #Y07080. My Yakima contact confirmed no adapters or…

view full answer...

Answer 11

Yes, the Rhino-Rack Universal Pioneer Platform Rack for Crossbars #RR42115BF is designed to fit into the channels on top of the crossbars like the Yakima HD bars you mentioned.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Which Rhino Rack Pioneer Platform Tray Fits 2018 Toyota 4Runner with Raised Side Rails

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching