Does Swing Out Extension Bracket LC182496 Fit HappiJac Swing-Out Extender Bracket # HJ54FR

Question

Question:

Will extender HJ54FR attach to LC182496 ? I’m trying to get the most extension possible to fit around my 2018 Ram Dually

asked by: Jerry N

1

Helpful Expert Reply:

Yes the Swing Out Extension Brackets # LC182496 does fit the HappiJac Swing-Out Extender Bracket # HJ54FR.

expert reply by: Jameson C

1

Answer 1

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a…

view full answer...

Answer 2

If one set of the HappiJac Extender Brackets part #HJ54FR doesn't provide enough clearance Happijac has told us that you can use a second set to gain additional clearance.

view full answer...

Answer 3

The only extender bracket that we have for the Happijac is the HappiJac Extender Bracket for Dual Wheel Chassis Truck Camper Jacks #HJ54FR that you mentioned.

view full answer...

Answer 4

The correct swing-out brackets for a dually are the HappiJac Swing-Out Extender Brackets for Dual Wheel Chassis Truck Camper Jacks #HJ54FR. In terms of size these will give you 3-1/2" to 4-1/2" of extension. You can use these with…

view full answer...

Answer 5

Yes, it is. The Jensen LED 12V RV TV item #JTV1917DVDC has an HDMI port in the back which is what you will need to connect a Firestick or ROKU. You'll definitely need to use that HDMI extension cord that comes with the Firestick though.…

view full answer...

Answer 6

I can only help you pick out the best psi but I can't tell you off-hand exactly the best pressure to use. What you want to do is put in an equal amount of pressure in both bags till the truck is sitting as close to stock ride height as it…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Does Swing Out Extension Bracket LC182496 Fit HappiJac Swing-Out Extender Bracket # HJ54FR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching