Replacement Antenna for Furrion Vision S Camera

Question

Question:

Hi, I bought my trailer a year ago and had the dealer install the furrion backup camera. Need a replacem3nt antenna. I noticed the sleeve in your pics that connects camera body to antenna is a solid cylinder. Mine had a slot in it. Will this work for me?

asked by: David

0

Expert Reply:

For a replacement antenna for a Furrion Vision S camera you'd want the part # 772577.

expert reply by: Jameson C

0

Answer 1

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The Furrion cameras, like what comes in the part #FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I…

view full answer...

Answer 5

Yes, the Replacement 7" Monitor #FR47FR will indeed be compatible with your Furrion camera system with the FCE48TASH side marker cameras. The FCE48TASH is basically Furrions newest most recent camera model, so the new monitors are undoubtedly…

view full answer...

Answer 6

Yes you can upgrade the 5 inch monitor of your Furrion Vision S system with a 7 inch one with the part #FR47FR and you'd be set.

view full answer...

Answer 7

The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen #FOS43TASF sounds like it simply has electrical interference or has obstructions causing that weak signal. You may want to replace the antenna with…

view full answer...

Answer 8

The plunger pins are usually specific to the brand of jack and usually are not interchangeable. Unfortunately, without knowing the manufacturer and model number of your existing jack, I cannot say with certainty that the pin will work for you. I have…

view full answer...

Answer 9

The antenna should just twist on and off so if the broken one on your current system is stuck you can use pliers to get a bit of a better grip to assist in unscrewing it, which will allow you to install the Replacement Antenna for Furrion Vision S…

view full answer...

Answer 10

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 11

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...