2017 Subaru Crosstrek Roof Top Tent Compatibility

Question

Question:

Will they work for a spaorrow roof nest tent on a 2017 crosstrek? Thanks

asked by: Robert W

0

Expert Reply:

The Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 50" Long, part # MPG215, is confirmed to fit your 2017 Subaru Crosstrek. This rack is rated to carry 165lbs. With regard to the Sparrow Roof Nest Tent's compatibility on the Malone AirFlow2 Roof Rack, per RoofNest, the Sparrow Roof Nest Tent will work on your 2017 Subaru Crosstrek.

I have included a link to a video review of the roof rack below.

expert reply by: Mark Smith

0

Answer 1

The hitches available for the 2022 Kia Telluride do have a very similar appearance. The Curt #C13420 uses a glossy powder coat finish, while the etrailer brand #e95ZR uses a matte finish that I feel makes the hitch less visible. The etrailer #e95ZR…

view full answer...

Answer 2

Yes, the etrailer Trailer Hitch Receiver #e45ZR is confirmed to fit your 2023 Kia Telluride.

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e45ZR does mount to your existing frame utilizing the factory mounts that are already in the frame. You will not have to do any drilling to attach this receiver to the frame but some trimming of your rear fascia…

view full answer...

Answer 4

Yes, the etrailer Trailer Hitch Receiver #e45ZR is a confirmed fit for your 2023 Kia Telluride SX X-Line. Attached is an installation video for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to…

view full answer...

Answer 5

Your 2022 Kia Telluride is compatible with hitch receivers from Curt and etrailer. Here are the main features of each option. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C13420, has a maximum tongue weight of 750 lbs and…

view full answer...

Answer 6

For a great looking hitch that fits your 2022 Kia Telluride I recommend the etrailer Trailer Hitch Receiver #e45ZR. This is a Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 5,000 lbs and tongue weight of 750 lbs.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

There is one hitch available for the 2023 Kia Telluride. It is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Telluride with included hardware. I confirmed with the manufacturer this also fits the 4WD models. I really like…

view full answer...

Answer 11

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

2017 Subaru Crosstrek Roof Top Tent Compatibility

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching