Mirror Mount Wedge, and Cameras that Can be Used with RVS-718-3SC

Question

Question:

I’m looking at the RVS-718-3SC. To mount to a windshield will the RCS-619-M clip work? I am also looking to match this monitor with the RVS-775L and R side cameras and the RVS-812N rear camera.

asked by: Jim

0

Expert Reply:

Yes the universal mounting pin part # RVS34FR is compatible with the # RVS-718-32C that you referenced.

This would also work with the # RVS-775L, # RVS-775R and the # RVS-812N.

expert reply by: Jameson C

0

Answer 1

The standard Voyager monitor mount uses 4 bolts which is what the monitors normally used with the camera WVCMS130AP you have should have. For that we have the six inch tall mount part #VOSHD6MNT or the 4 inch tall version #VOSHD4MNT. These are…

view full answer...

Answer 2

For your 2021 Winnebago 2108DS pre-wired for a Voyager back-up camera I recommend the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR. This wireless backup camera system is designed for RVs/Travel Trailers with factory-installed Voyager…

view full answer...

Answer 3

The Voyager Universal Monitor Mount #VOSHD6MNT is the correct mount for the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR. Adjustable monitor mount secures to your dashboard and holds up to a 7 inch monitor. The bracket has a simple…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Mirror Mount Wedge, and Cameras that Can be Used with RVS-718-3SC

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching