Mounting The Tow Bar Wiring Bracket On A 2017 Jeep Grand Cherokee

Question

Question:

Where and how do I mount the wiring plug bracket

asked by: Richard J

0

Expert Reply:

If you look at the 10 minute mark of the attached video you'll see Shane took the wiring bracket that came with the etrailer Invisible Base Plate Kit # e98950 and bolted it to the bumper beam. Once you have it attached you'll just have to cut the fascia to allow for the wiring from your RV to plug into your vehicle.

expert reply by: Kevin C

0

Answer 1

The 2019 Jeep Grand Cherokee (All Models) is a great vehicle to be flat-towed and a very popular option at that. It will require a few things to get setup for this but I will try to make this easier and list all of these below with my…

view full answer...

Answer 2

We do have other options in stock that are confirmed to fit your 2021 Jeep Grand Cherokee. If you are looking for a direct connect style base plate to match to a current Blue Ox manufactured tow bar, we have an available option. I suggest the…

view full answer...

Answer 3

There is a trim level of your 2017 Jeep Grand Cherokee that can be flat towed. You are able to flat tow a Grand Cherokee model with the Quadra-Trac II/Quadra-Drive II with 4-Lo Range. With regard to the special kit for the power steering, there was a…

view full answer...

Answer 4

As for the vent replacement, I recommend sticking with the MaxxAir brand and going with the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White #MA00-07000K. The The built-in rain shield on this powered roof…

view full answer...

Answer 5

The brake light switch wire for your 2023 Jeep Grand Cherokee Summit isn't useable so you wouldn't be able to install a brake light relay kit any way. In cases like this the turn signal will override the brake signal until the computer inside…

view full answer...

Answer 6

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 7

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 8

No, but I have one that does. It is the Demco Tabless Base Plate Kit item #DM9519291. This base plate kit fits all models of the 2020 Jeep Grand Cherokee. I have linked an installation video below. The Demco item #DM9519222 you referenced only fits…

view full answer...

Answer 9

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

view full answer...

Answer 10

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 11

The vehicle has to be placed in the accessory mode because if the key was locked it would not allow the steering to move as needed when flat towing the vehicle. Per the owner's manual it states that the vehicle should be started every 6 hours to…

view full answer...

Mounting The Tow Bar Wiring Bracket On A 2017 Jeep Grand Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching