Can I Use a Rhino Batwing Awning with an ARB Base Rack

Question

Question:

Hello, Im wondering if you have a solution to attach the Rhino-rack Batwing awning onto ARBs new Base Rack? Im not sure if the ARB Tray mounting kit is suitable as the baserack is flat panels, rather than rails. thanks!!

asked by: Christine G

0

Expert Reply:

There is a solution available for you, but the # RR31103 will not work for you. It looks like ARB manufactures a T-slot adapter for their BASE Rack, and the Rhino-Rack Batwing Awning # RR33200 can be mounted into t-slots on a roof rack-which is what this will create for you. We don't offer ARB parts so you would need to source that from them but you could use a Rhino-Rack Batwing (driver's side) # RR33100 or (passenger side) # RR33200, or the Sunseeker # RR32133 awnings in the t-slot mounts.

expert reply by: Erik B

0

Answer 1

The three holes on the back of the Rhino-Rack Sunseeker and Batwing Awning Mounting Bracket for Pioneer Platform Rack #RR43259 are spaced 1" on center.

view full answer...

Answer 2

On the portion of the Rhino Rack Awning Bracket part #RR31103 that you referenced that holds the awning the holes are 1-3/8 inches apart from left to right and 4-1/2 inches from front to back.

view full answer...

Answer 3

The two holes on the metal spacer block that are included with the Rhino-Rack Foxwing and Sunseeker Awning Mounting Bracket part #RR43259 are spaced 1" apart on center. I called my contact at Rhino-Rack to confirm this.

view full answer...

Answer 4

The dimensions of the top T-channel in Rhino-Rack Vortex Aero Crossbars like #RRVA126B-2 measure 0.25 inches deep x 0.86 inches wide inside the channel. The top of the channel measures 0.43 inches wide. As for the hardware that installs in to the…

view full answer...

Answer 5

I attached a picture that has the dimensions of the brackets of the Mounting Kit for Rhino-Rack Batwing Awning #RR25FJ that you referenced.

view full answer...

Answer 6

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 7

Not a stupid question at all! Manufacturers of different products typically don't like to comment on fitment with other products so it can be difficult to confirm fits at times. While I don't know the dimensions of your ARB awning, I do have…

view full answer...

Answer 8

The DeeZee Specialty Seres Tongue Toolbox measures 36 inches(back) x 18 inches(front) x 19-1/2 inches wide x 17-3/4 inches tall, and has a lockable hasp. This is designed to be able to sit on a trailer tongue and has the hardware included. From my…

view full answer...

Answer 9

I do have an RV trailer hitch receiver that may work for you in the Adjustable Width Trailer Hitch Receiver part #13703. The hitch receiver will fit trailers with frame rails from 22" to 72" apart. The frame brackets sit about 3" down…

view full answer...

Answer 10

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your trailer…

view full answer...

Can I Use a Rhino Batwing Awning with an ARB Base Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching