Grease and Oil Bath Version of Hub Seal 010-036-00

Question

Question:

Can you tell me if i can use a 010-036-00 seal with oil or grease?

asked by: Corbett C

0

Expert Reply:

The grease seal 010-036-00 that you mentioned is our part number # RG06-070 but then for the exact matching oil bath seal with same dimensions you'd want the part # 10-63.

expert reply by: Jameson C

0

Answer 1

The TruRyde Grease Seal #GS-2250DL referenced in your question is a double lip seal that will do a great job at retaining the grease inside your hubs. They will also exclude water and road grime better than a standard single lip seal. The Redline…

view full answer...

Answer 2

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 3

For an oil seal matching the inside and outside diameter of the 10-36 grease seal, you will want the Unitized Oil Seal for Trailer Hubs #10-63 for your Dexter axles. You can also use the Oil Seal #9103309 confirmed to fit Hayes axles of the same…

view full answer...

Answer 4

The grease seals that will work with your Lippert axle is part #RG06-070. this comes with a quantity of 2 double-lipped seals in the package. If you have everything apart you may want to replace the bearings and races as well. You would need part…

view full answer...

Answer 5

One common grease seal size for a 6,000 lb axle has an inner diameter of 2.25" and outer diameter of 3.376" just like the #RG06-070. More than likely this matches what you have now, but you can't be 100% sure without either measuring or…

view full answer...

Answer 6

The Lippert 7,000 lb axles use a seal that is 2.250 inches inner diameter and 3.376 inches outer diameter. You will want Grease Seals 10-36 (pair) #RG06-070 for the replacements or complete bearing kit #BK3-200 which includes replacement bearings,…

view full answer...

Answer 7

The Lippert Seal part number 122088 that you referenced has the same dimensions of 2.25 inner and 3.376 outer diameter as the Grease Seals #10-36 that you referenced so they should work well for you. Seal width should not matter, the only important…

view full answer...

Answer 8

In order to get the correct replacement seal you will want to remove the seal from your hub and get the number stamped on it. If you can't find the number you can also use the dimensions of your seal to get the correct replacement. Get the outer…

view full answer...

Answer 9

It sounds like the 6K might be referring to 6,000 pounds although I cannot be 100 percent sure on that. I could tell you for sure if you could tell me the inner and outer bearing numbers stamped in to the bearings. A 7K axle will use inner bearing…

view full answer...

Answer 10

Your 5200-lb Lippert axle 121066 uses inner bearing #25580, outer bearing #LM67048 and grease seal #GS-2250DL. For all of these you can use kit #BK3-300. I also recommend bearing packer tool #ALL647646 for a cleaner method of packing the new bearings…

view full answer...

Answer 11

Using the gasket product is not really necessary, as the 10-36 double lip seal will do a good job of keeping the grease in its place unless the hub is being overfilled with grease. If you are dealing with a idler hub with no brake assembly or brake…

view full answer...

Answer 12

For a 5,200 lb Lippert axle the correct hub seal is the part #GS-2250DL.

view full answer...

Grease and Oil Bath Version of Hub Seal 010-036-00

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching