Reverse Lockout Solenoid Replacement for Demco with 800 psi Rating

Question

Question:

looks like Demco DM5836

asked by: Olivier D

0

Expert Reply:

Do you happen to know what brand of actuator you have. I can't find any info on the part number you mentioned but if you can let me know what brand you have I can see what you'd need if we have a solution.

expert reply by: Jameson C

0

Olivier R.

5/21/2021

looks like Demco DM5836

Reply

Jameson C.

5/21/2021

Based on what you mentioned seeing on the label of your current lockout yes the Demco lockout solenoid part # DM5836 is the correct kit.

Reply

Answer 1

The blue wire on a trailer is typically the output wire to the electric brake assemblies. If this is the case on your trailer then the wire should only have power when you are hooked up to the tow vehicle and are applying the brakes, either by…

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

There is no longer a replacement for that particular master cylinder. Atwood is out of business and Demco did acquire the coupler part of their business, but have not made replacement parts for older couplers. The closest option we have to replace…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

view full answer...

Answer 11

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 12

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Reverse Lockout Solenoid Replacement for Demco with 800 psi Rating

Product Page this Question was Asked From

Continue Researching