Installation Kit To Install Westin Safari Light Mounting Bar Onto 2006 Chevy TrailBlazer

Question

Question:

Hello will this installation kit fit a 2006 Chevy trailblazer Lt model? Thank you

asked by: Rob G

1

Helpful Expert Reply:

The Westin Safari Light Mounting Bar with Installation Kit - 2" Tubing # 30-0025-1345 fits your 2006 Chevy TrailBlazer. If you just need the installation kit and not the entire light mounting bar, then you just need Custom Installation Kit for Westin Safari Light Bars # 30-1345.

expert reply by: Andrew N

1

Answer 1

The closest compatible option for your Dometic DOTR12CB RV microwave's size is the Furrion Standard RV Microwave #FMSN09BL. It measures 19-1/16" W x 13-5/8" H x 15-7/8" D with a 0.9 cu ft capacity.

view full answer...

Answer 2

I agree, the bag for the NOCO Boost X Jump Starter #NOC88VR is a nice way to keep everything together but it definitely lacks in the protective department. To keep your Boost X Jump Starter safer you'll want to pick up the EVA Protection Case…

view full answer...

Answer 3

The correct hardware/brackets to mount the Westin Sportsman Grille Guard #40-0145 to your 2002 Dodge Durango is the Replacement Hardware Kit for Westin Sportsman Grille Guard #40-014PK.

view full answer...

Answer 4

We do indeed have a photo of the Westin replacement install brackets, part #40-012PK, you can see the photo by clicking the provided product link. The brackets are meant to be used to install the Westin Sportsman Grille Guard #40-0125 on a 1999 to…

view full answer...

Answer 5

The Replacement Jack Leg for Fisher Snowplow #3371315205 will work as a replacement on your Fisher snowplow as long as you have the single vertical jack like pictured and not the two angled jacks.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...