Similar Bike Rack to Yakima KingCobra that Can Fit Overhaul HD Rack

Question

Question:

I would really like to get old round bar setup off my truck cab and get a Overhaul HD setup. Only thing holding me back is trying to find a way to mount my King Cobra bike carriers to the HD bars. No one seems to know for sure if the Universal Mighty Mounts fit the newer HD cross bars, do you?

asked by: Brian

0

Expert Reply:

Your older style KingCobra bike rack can't be adapted to fit the T-slots of newer bars or fit around the Overhaul HD # Y01151-58 setup that fits your 2001 Chevy Silverado so you'd need to go with a new rack similar to it like the HighRoad part # Y75FR. This rack holds the bike by the wheel like the KingCobra but can fit into the top channels of the Overhaul.

expert reply by: Jameson C

0

Answer 1

The front mounting hardware is built into the Yakima FrontLoader Wheel Mount Bike Carrier #Y02103 and is not replaceable. We do carry the Replacement Rear Clamp Assembly #8880208. Do note that this carrier is only capable of fitting crossbars up to…

view full answer...

Answer 2

I reached out to my tech at Yakima and she confirmed that the HighRoad models #Y02114 and #Y75FR are not compatible because part of the rack extends underneath crossbars that interferes with the LockNLoad Platform #Y05047. It requires more space…

view full answer...

Answer 3

I have several bike rack options that are compatible with the Yakima LockNLoad Platform Roof Tray #Y05045, but the HighRoad #Y02114 isn't one of them. Below is a list of compatible roof bike carriers for the LockNLoad: Yakima HighSpeed…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

view full answer...

Answer 11

Yes, the Roamer LT Roof Rack for Pop-Up Campers and Camper Shells #S80510 will fit your 2023 Forest River Flagstaff 176LTD. It is also what I recommend to add a roof rack for a bicycle carrier on your camper. Once installed you will be able to add…

view full answer...

Answer 12

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load…

view full answer...