Will the Rhino-Rack Pioneer Platform Rack Attach to My 2014 Subaru XV Crosstrek?

Question

Question:

Hello, I have a 2014 Sub XV Crosstrek. It shows this will fit vehicle which is good. My question is previous platforms required rails to attach. Does this new version connect direct to the legs provided? Thanks for any help.

asked by: Doug

0

Expert Reply:

Yes, the Rhino-Rack Pioneer Platform Rack - Raised Side Rails # RR77AB comes with everything you need to attach it to your factory raised rails on your 2014 Subaru XV Crosstrek.

expert reply by: Bob C

0

Answer 1

There are a few things that you can do to ensure a fit, and approach the wobble of your existing box without making a purchase. First, you'll want to make sure that your crossbar kit is spread out as far as the mounting system or crossbars will…

view full answer...

Answer 2

The height dimension of the Yakima GrandTour Lo part #Y46FR of 10 inches is the height added to a set of crossbars it would be installed on. Since this would be the most reason common why someone would be curious about the height of the box…

view full answer...

Answer 3

Yes, we have the Rhino Rack Pioneer Platform part #RR77AB that's a confirmed fit for the raised rails of your 2024 Subaru Outback Wagon. This will give you a platform that measures 60 inch by 49 inch and comes with everything you need to install…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 9

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 10

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Will the Rhino-Rack Pioneer Platform Rack Attach to My 2014 Subaru XV Crosstrek?

Continue Researching