2010 Toyota Highlander Trunk Rack Fit

Question

Question:

Does this fit for Toyota highlander 2010

asked by: Marie

0

Expert Reply:

We do have a fit for your vehicle. Unfortunately the rack you selected will not fit your vehicle. I recommend the Yakima FullBack 2 bike rack, part # Y02634, or the Yakima FullBack 3 bike rack, part # Y02633. Each of these racks will work with your vehicle. I have included product links that go into greater detail below. These racks have a couple of features that I believe are invaluable. SUCH AS? The Yakima FullBack 2 and 3, unlike most trunk racks, have vehicle specific fit measurements. In addition each of these racks come with a lock to secure the bikes to the rack and a security cable that secures the rack to your vehicle.

expert reply by: Mark Smith

0

Answer 1

In order to install the Yakima FullBack 2 Bike Rack part #Y02634 on a 2012 Toyota Highlander you'll need to change out the upper and lower hooks and install them in anchor mode which is discussed in the installation manual. That said, there…

view full answer...

Answer 2

I can understand not wanting to remove or cut anything on your 2021 Toyota Highlander, but every single hitch for this vehicle requires some type of modification. There is one though, that requires the least amount, which is from Curt, and fits your…

view full answer...

Answer 3

The Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms, part #Y02634, would be my trunk bike rack of choice. My first reason is that this is a two bike trunk rack. I am never a proponent of carrying more than two bikes on a trunk bike rack,…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

For your 2024 Toyota Sienna XSE I recommend the etrailer Trailer Hitch Receiver #e56RR. This features a 2" receiver with a bolt-on installation. It has a 350 lb max tongue weight which should be more than enough for your bike rack and bikes. It…

view full answer...

Answer 9

Hey Antone, you are right the battery placement on the 2022 Honda CR-V is the reason the hitches do not fit so a trunk mounted bike rack solution would be your best bet. The one I recommend for your CR-V is the Saris Bones 2 part #SA805BL that you…

view full answer...

2010 Toyota Highlander Trunk Rack Fit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching