Yakima FullBack Trunk Mount 2 Bike Rack Review Video

Hey Antone, you are right the battery placement on the 2022 Honda CR-V is the reason the hitches do not fit so a trunk mounted bike rack solution would be your best bet. The one I recommend for your CR-V is the Saris Bones 2 part #SA805BL that you…

In order to separate two awning head covers such as the Solera Awning Plain Drive Head Front Cover part #LC289560 and the Solera Awning Plain Drive Head Back Cover part #LC289561 you'll need to remove the screws which are accessed from the…

Replacing pull-out steps won't require a bunch of modifications if we can find a matching fit to your current steps. To find the correct fit we'll need to know the entry height (measurement from the ground up to the mounting bracket)…

The Thule Venture is the same bike rack as the Thule Passage #TH911XT and the Passage is a confirmed fit for your 2015 Toyota RAV4. However, since your RAV4 has a spoiler you will want to make sure there is a gap at the top of your rear spoiler for…

I have the perfect trunk mount bike rack for your 2014 Toyota RAV4 that will not even touch that rear spoiler. It is the Hollywood Racks Over-the-Top rack #HRF2 (or #HRF2-3 for 3 bikes). This rack has an additional upper arm piece that moves the…

I checked the install instructions of the EcoHitch part #306-X7194 that you mentioned and the size of wrench you'd need for the 3/8 inch bolts is 9/16 inch.

I have a couple of options that will work for you. The safest way to carry two bikes on your 2014 Prius C, and my recommendation, is by hitch bike rack. This will require you to get a hitch receiver installed, but the rack will be bolted into your…

You've made a great choice! The Thule Passage trunk-mounted bike carriers are very popular because the smart FitDial system makes them quick and easy to install. The two sizes are very close in weight. The Thule Passage 2 Bike Carrier #TH910XT…

We have exactly what you need! To secure a girl's bike (or any bike with an alternative frame) to a hanging style rack like the Yakima FullBack #Y02634 that you referenced, you will just need an adapter bar like the Kuat Ubar #UB01. This will…

When installing the Draw Tite hitch part #DT79MR there is trimming required of the rear fascia to allow the hitch opening to pass through. If you watch the install video I attached you can see the trimming outlined.

We have checked with the manufacturer on this in the past. We have confirmed that the Draw-Tite class 3 hitch #DT79MR will fit the 2024 Honda CR-V hybrid. This is a class 3 hitch with a 2" receiver. We have also confirmed fitment with several of…

This is a really good question, and honestly I would say it's borderline a design flaw or at least a feature of the Yakima Fullback 2 part #Y02634 that wasn't thought out all the way. If carrying a single bike with the Yakima Fullback 2 part…