Replacement Override Plugs For Lippert Power Tongue Jack

Question

Question:

I am missing the manually overide plug for my jack, I seen in 1 of the customer questions that 1 of your experts recommended a # LC115863 plug as the replacement but my jack has an oval hole instead of round ???

asked by: Devin S

0

Expert Reply:

We do have the correct replacement override plugs for your Lippert Power Tongue jack, though it is indeed different than the part number you mentioned; instead, what you will need is the following:

- Replacement Override Plugs for Lippert Electric Trailer Jack # LC733924

As you can see by the photos on the product page, these are the correct shape for your jack.

expert reply by: Kyle S

0

Answer 1

Yes for just the rubber plug for the top of the Lippert Jack part #LC285318 that you referenced you'd want the part #LC733924.

view full answer...

Answer 2

The Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack #EJ-3520-HD is a 10mm socket. As far as your jack making a clicking noise, it could be a few things. First check the ground connection on the motor and ensure it is…

view full answer...

Answer 3

The replacement top plug you are looking for that fits your Lippert Jack 1817941 is the 2 Inch Replacement Cap for Lippert Trailer Jacks #LC115863. Unfortunately we do not have a replacement for the manual crank handle.

view full answer...

Answer 4

The correct replacement manual crank handle you need for your RAM Jack is the part #EJ-3520-HD.

view full answer...

Answer 5

I do have some options for you but there is no guarantee that they will work unless you have the exact jack they are designed to fit. If you can provide me with the exact jack you have then I may have a better option for you but otherwise; part…

view full answer...

Answer 6

Stromberg Carlson Electric Trailer Jacks. like the #JET-5000 all use the same manual crank socket size of 7/16 inch. You can also purchase a Replacement Manual Crank Handle for Stromberg Carlson Electric Trailer Jacks with part #SC94VR, but you…

view full answer...

Answer 7

We do sell a replacement manual crank for the etrailer jack #EJ-3520-WBX with the part #EJ-3520-HD.

view full answer...

Answer 8

We have the replacement override nut with the part #LC55FR and also the replacement crank handle part #LC285324. The size is a 3/4 inch hex socket if you had a ratchet and socket set nearby.

view full answer...

Answer 9

Override plugs are not universal and indeed are specific to certain trailer jacks. The ones we carry are the Replacement Override Plugs for Lippert Smart Jack Electric Trailer Jack #LC733925 which is for the Lippert Smart Jack Electric Trailer Jack…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...