RetraxONE XR Cover that Fits 2018 Chevy Colorado 5 Foot Bed with Accessory T-Slots

Question

Question:

Hi I have a mx one cover will these rails fit my truck it a 2018 Chevy Colorado 5’2 bed

asked by: Eddie

0

Expert Reply:

Retrax doesn't make a set of T-slots/channels for the MX ONE covers so if you have one and you are wanting the channels you'd have to go to the Retrax XR part # RTT-60454 as a new cover.

expert reply by: Jameson C

0

Answer 1

I confirmed with Retrax that you can use the XR T-slot Rails on your Retrax One tonneau cover as long as your 2014 Ram 1500 does not have the RamBox. You can use Replacement Side Rails for Retrax XR Series Hard Tonneau Covers - T-slot Style #RTX59FR.…

view full answer...

Answer 2

The only difference between the RetraxPRO MX Hard Tonneau Cover #RT80462 and the RetraxPRO MX Hard Tonneau Cover - Wide Rails #RT80472 is that 80472 that has an extra piece that goes over the bed rails of your truck (these tonneaus fit certain years…

view full answer...

Answer 3

The T Slot rails will work for your Retrax Pro MX tonneau cover, but the #RTX39FR are a fit for a GM truck, so they wouldn't work for your Ram. For your 2017 Ram 1500 with the 5-1/2 foot bed, you'd want to use the #RTX96QR T-slot rails which…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 8

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 9

I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails #RTT-82381 on the Cover #RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac #A54KG would be an option as this…

view full answer...

Answer 10

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...