Base Rails For Thule TracRac SR For 2015 Ford F-250 With 6-3/4 Foot Bed

Question

Question:

Hi there, I currently have a trac rac SR for a 2017 ram 1500 6.5 ft box. I bought a 2015 f-250 with a 6.5 ft box 6 foot 11 i think Im wondering if the baserails for the ram will fit on the f250? If not Im looking for replacement rails for the f250 I would also like 4 replacement feet for a trac rac SR to transform a regular trac rac to a sliding rack I have the base rails already Thanks so much!

asked by: Riley G

0

Expert Reply:

We can get your 2015 Ford F-250 with a 6-3/4 foot bed set up to use your Thule TracRac SR, and I verified with Thule that the base rails are indeed different than those that fit a Ram truck. So, the correct base rails for your F-250 are the following:

- Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21510

In regards to replacement feet for a TracRac SR for your other ladder rack, there are two:

- Replacement Modular Slider for Thule TracRac or UtilityRac Truck Bed Rack - Left Rear/Right Front # TA01-42004

- Replacement Modular Slider for Thule TracRac or UtilityRac Truck Bed Rack - Left Front/Right Rear # TA01-42003

expert reply by: Kyle S

0

Answer 1

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 2

Based on your pictures and dimensions the part #TA7521902001 is the correct replacement leg. This is 21 inches long though so you might remeasure yours again as it's easy to be off by 1/4 inch.

view full answer...

Answer 3

For your TracOne, the replacement leg is normally #8523446001 but that has a length of 26-1/4 inches. We don't have anything specific to the dimensions you gave, but we do that the following: #TA7521902002 at 22-3/4 inches tall #TA7521902001 at…

view full answer...

Answer 4

I did some online research and I found out the Peragon tonneau covers leave the stake pockets uncovered. You need the stake pockets to install the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs, part #TH43001XT-501EX. The…

view full answer...

Answer 5

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-781 comes with the needed expansion block pocket mounts so there is no need to order them separately if you are getting this ladder rack for your 2015 GMC Sierra 2500 with a 6-1/2 foot…

view full answer...

Answer 6

Per the included instructions diagram, the MDP Composite Base Insert / Replacement Nylon Insert for TracRac Sliding Ladder Rack Modular Base Sliders #TAFX-42008 is referenced in image D as a required part for installation. The Replacement Modular…

view full answer...

Answer 7

Good news! I was able to go out to our warehouse and find the instructions for the #TH21501 base rails which are included in the Trac Rac Kit #TH43002XT-782 that is a confirmed fit for your 2014 Chevy Silverado 1500 5.5 foot bed. I will be sending…

view full answer...

Answer 8

I reached out to my contact at TracRac and the Sliding Rack #TH43002XT-783 has not been confirmed to fit on a 5 foot bed, so even though there is a very good chance it would work with the minor modifications you mentioned, it would void the…

view full answer...

Answer 9

To replace the load stops on the Thule TracRac for your 2018 Chevy Colorado you need 3 different parts; the Load Stop #8537165, M8 T-Bolt #853-5715, and the Hand Knob #TAKB-90004. Obviously you'll need 2 of each if you need to replace both load…

view full answer...