Which Replacement Bulbs For MC44AB or 118A/117R Light

Question

Question:

I need some bulbs for the 118A/117R lights and one complete amber light. Do you have just the bulbs?

asked by: Ron K

0

Expert Reply:

The bulbs that are in the 118A/117R lights you mentioned are the Replacement Side Marker Light Bulb # 194 # A194B. These are the bulbs that are in the complete amber light you're looking for, as well- the Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens # MC44AB.

expert reply by: Erik B

0

Answer 1

For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links…

view full answer...

Answer 2

Based on my research, the Glo-Brite 118A amber light is approximately 4 inches long by 1-1/2 inches wide. I spoke with my contact at Optronicc who confirmed that their Replacement Amber Lens #A44AB will fit the Glo-Brite 118A trailer light. I found…

view full answer...

Answer 3

The Replacement Amber Lens for MC44 Series and BA44 Series Trailer Lights, part #A44AB, will work has a replacement light for your Glo Brite 118A LED. I have included a video demo below. I have included a product description and a video demo below.

view full answer...

Answer 4

I spoke with my contact at Optronics to see if the lens for their Rectangular LED Trailer Clearance, Side Marker Light with Reflector #MCL44AB will work for the Glo-Brite 118A amber trailer light. She confirmed that the #A44AB lens will work on the…

view full answer...

Answer 5

The Glo-Brite 118A is the amber light and for the lens you need #A44AB while the light assemblies are the Optronics #MC44AB. For a Glo-Brite 117R, which is the red light, you need replacement lens #A44RB and light #MC44RB. We do not carry Glo-Brite…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Which Replacement Bulbs For MC44AB or 118A/117R Light

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching