Fit of Curt C13900 Universal Fit Trailer Hitch on 1989 Toyota Pickup

Question

Question:

Hello. Will this hitch fit a 1989 toyota pickup sr5. Thank you for your time in responding.

asked by: Onie

1

Helpful Expert Reply:

According to Curt, their Universal Fit # C13900 trailer hitch is a fit for a 1989 Toyota pickup, but you'll likely need to drill into the frame to mount the hitch. If you'd prefer a no-drill option, use the Curt # 13086.

expert reply by: Mike L

1

Answer 1

To get your replacement hardware for your trailer hitch receiver, I recommend the Replacement Hardware Kit for Trailer Hitches #RHK. The size of bolts and hardware needed varies depending on the hitch, so this will ensure you have the correct fit…

view full answer...

Answer 2

I have attached for you below a list of the part you will need to tow a trailer with brakes using your 1994 Toyota Pickup. Curt Trailer Hitch Receiver part #13086 Hopkins Plug-In Simple Vehicle Wiring Harness part #HM43315 Universal Installation…

view full answer...

Answer 3

I spoke with my contact at Curt and found that the distance from the top of the side brackets to the top of the hitch receiver tube is 9.8 inches. I made a picture showing this for you.

view full answer...

Answer 4

For your 1992 Toyota Hilux, we did have a neighbor that installed the Curt Trailer Hitch Receiver #13086 on his Toyota Hilux model. I went ahead and attached a picture of the fitment of the hitch on his truck. However, I called Curt and my contact…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Fit of Curt C13900 Universal Fit Trailer Hitch on 1989 Toyota Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching