Dimensions of Replacement Lid for Camco RV Polyethylene Propane Tank Cover

Question

Question:

what are the internal or external dimensions so I dont order this by mistake

asked by: Thomas G

0

Expert Reply:

I was able to get the dimensions for you of the Replacement Lid for Camco RV Polyethylene Propane Tank Cover # CAM40567.

As you can see by the diagram I made, this lid measures 12 inches by 5 inches.

expert reply by: Kyle S

0

Dimensions of Camco Propane Tank Cover CAM40567
(click to enlarge)

Answer 1

Are you looking for a replacement propane tank cover lid like the part #CAM40567 which fits the black propane cover #CAM40539.

view full answer...

Answer 2

There is no need to further re-pack the bearings with the Bearing Buddies like the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) #BB2441. So long as you maintain the grease levels, repacking the bearings isn't necessary,…

view full answer...

Answer 3

There's definitely a cover that will work for your 2011 Heartland MPG 183 but #CA80-197-171001-00 is designed to be used with R-Pod trailers and isn't something you'd want to use with your trailer. Your Heartland measures just over…

view full answer...

Answer 4

We do offer a replacement lid for Camco RV polyethylene propane tank covers like #CAM40565 that fits a single 20-lb tank. The replacement lid is part #CAM40567. The lid is black and measures approximately 12 x 5-inches. This lid is specific to this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Dimensions of Replacement Lid for Camco RV Polyethylene Propane Tank Cover

Product Page this Question was Asked From

Continue Researching