Availability of Yakima Rack and Roll Trailer Kickstand

Question

Question:

Hello, can you suggest any Trailer Kickstand alternatives that would work well with the Yakima Rack and Roll Trailer?

asked by: Noa

0

Expert Reply:

The easiest and best kickstand solution for the Yakima Rack and Roll trailers is the part # Y08115 that you referenced. If yours is broken or in otherwise need of replacing this would be the best choice. If for some reason you needed a different type of function from it that it doesn't provide let me know and I'll see if there's a possible jack solution but in terms of just being a foldable kickstand this is best option.

expert reply by: Jameson C

0

Answer 1

The Yakima Rack and Roll Trailer Kickstand, part #Y08115 is designed to fit 2x2 inch tubing. Keep in mind that the trailer that this item is designed for has 200 lb capacity, so it is not designed for heavy duty use.

view full answer...

Answer 2

I recommend using the Yakima Kayak Trailer for 5 Kayaks #Y24TR to transport your kayaks with your 2020 Jeep Wrangler Unlimited. The trailer will give you the ability to easily load and unload the kayaks from a manageable height. You will be able to…

view full answer...

Answer 3

The best cargo basket we have to use on the lower level of the Yakima EasyRider Double Decker Trailer item #Y08129 is the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket item #Y07080-82. This is the largest cargo basket that Yakima offers and…

view full answer...

Answer 4

I checked with Yakima and they told me to have to have you clean and lubricate the bushing and then try to pull it off with a pair of pliers. Force isn’t an issue because if they can’t get the bushing off we will need to replace the trailer side…

view full answer...

Answer 5

This is a fairly common issue when there is a 6-way trailer connector involved. The problem is that there is two ways that a 6-way will get wired and the only difference between the two is that the brake output and 12 volt accessory circuit are…

view full answer...

Answer 6

The test lights on the 7 to 4-Way Adapter #47345 will illuminate when there is a signal showing that the circuits are working (on the vehicle side). The bottom one will light up when the running lights are working. The center light will illuminate…

view full answer...

Answer 7

The Yakima part number #Y08111 is just the crossbars of Yakima Rack and Roll trailer which the correct size trailer for these 78 inch bars is the part #Y08107. This trailer would be able to accommodate both an e-bike and a trike.

view full answer...

Answer 8

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…

view full answer...

Answer 9

I may have an option that will work for you, but it will depend on the exact weight of your E-bikes. The Inno Tire Hold II Roof Bike Rack - Wheel Mount - Clamp On - Aluminum #INA389 will fit the Yakima Rack and Roll Trailer #Y08107 and will…

view full answer...

Availability of Yakima Rack and Roll Trailer Kickstand

Product Page this Question was Asked From

Continue Researching