Availability Of 2-1/2" x 1" LED Trailer Clearance Light

Question

Question:

Hi Im looking for see picture light Two green diodes with clear cover. Bought it a few years ago but can not find it anymore. Do you carry it or know where to get it. thanks in advance

asked by: Bodo H

0

Expert Reply:

I have a different option for you, but I was unable to find a light that matches the one you pictured with green diodes.

The closest options are the LED Trailer Mini Clearance or Side Marker Light - Submersible - 2 Diodes - Amber LEDs - Clear Lens # MCL13CA2B which has amber LEDs, or the # MCL13CR2B which has red LEDs.

I included videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Customer LED Light
(click to enlarge)

Answer 1

The Rhino-Rack Roof Rack Legs for Land Rover Defender #RL210DS8 are a specific fit for the Land Rover Defender while the Rhino-Rack Roof Rack Legs #RL210S2 are more of a universal fit. With that being said, we will want to make sure everything you…

view full answer...

Answer 2

Yes the Rhino-Rack Roof Rack Legs for Land Rover Defender - Gutter Mount #RL210DS8 would attach to Rhino Rack artificial gutter #739A.

view full answer...

Answer 3

You could use a bracket such as #CE31005PG for bow stop #YRJONBLOCK. A lot of trailers use this type of bracket for bow stops. I have also included a link to all of the brackets we carry.

view full answer...

Answer 4

The Grease Seal part #168233 has a double lip so it can be used on a boat trailer and be submersed under water, yes. This is also the correct replacement for the NOK AD2527E Grease Seal that you have now.

view full answer...

Answer 5

Hi Michael, While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand…

view full answer...

Answer 6

If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40% of…

view full answer...

Answer 7

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…

view full answer...

Answer 8

The majority of brake line installations we do in our shop match the first method you have in the photo, labeled "Branch". We also prefer to use rubber hoses as they are easier to work with and there won't be an issue if you end up with…

view full answer...

Answer 9

There are a couple of ways to mount the Kodiak Tee Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares #BH-T-3FIF. Many will use brake line mounting hardware on either side of the brake line which will provide enough…

view full answer...

Answer 10

What you have is a 5-way with a double wishbone, which means it is likely a double wire for marker lights as well as a double ground. You can replace your 5-way with another wishbone-style but it does not need to be a double wishbone with 7 wires,…

view full answer...

Answer 11

A galvanized steel fender like #CE17701G has a corrosion-resistant zinc coating applied to it, while a raw steel fender like #CE17720 does not. Both types can be painted, but it will be easier to paint the non-galvanized part. In either case the…

view full answer...

Answer 12

Though the ones you mentioned will not, we do have the correct replacement fenders for your Yakima EasyRider Double Decker Trailer, and what you need is the following: - Replacement Fender - Driver Side #Y68RV - Replacement Fender - Passenger Side…

view full answer...