Would Adco AquaShed Truck Bed Camper 290-12263 Fit Bigfoot 3000 Series 30C10 Camper

Question

Question:

Best Adco storage cover for Bigfoot truck camper 3000 series 30C10.11FR measures 18 foot 4 inches Will the 20 foot cover be to big?

asked by: Mark

0

Expert Reply:

The Adco SFS AquaShed truck bed camper cover part # 290-12263 would be a great cover for your Bigfoot 3000 Series 30C10 that measures 18 foot 4 inches. It would be a little bit longer than you'd need but it wouldn't be so big that it wouldn't fit well. It also has straps and cinches which allow the slack to be taken up a bit.

expert reply by: Jameson C

0

Answer 1

From the information available to me, the Lance 1062 truck camper is 20' in length. The overall length of the Classic Accessories Truck Camper Cover ids 19-11/16' #CA80037 in length. I suggest verifying that your Lance 1062 is a true full…

view full answer...

Answer 2

The dimension used for picking out truck camper covers is the length of the portion of the camper not including the overhang. See attached picture. Based on the length you listed of 200 inches excluding the overhang the best cover option we have is…

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 6

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…

view full answer...

Answer 7

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this hitch and…

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 9

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

view full answer...

Answer 10

Yes, the Extang E-Series Tonneau part #EX27UV does fit trucks that have spray-in bed liners and bed rail covers. The cover brackets can clamp to your bed rails without requiring trimming the cover as well.

view full answer...

Answer 11

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 12

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Would Adco AquaShed Truck Bed Camper 290-12263 Fit Bigfoot 3000 Series 30C10 Camper

Product Page this Question was Asked From

Continue Researching