Fit of Curt Class I C11412 Hitch on 2015 Volkswagen Golf TSi
Question:
HI, Is model # 11412 Curt suitable for a 2015 VW Golf TSi? On your site it says its good? On the Cie Curt website offers me another # model. Can you confirm that the Curt 11412 is good for my car?
asked by: Michel G
Expert Reply:
According to the Curt website, if you run the # C11412 through their part search and application information on the product page, it's stated that the # C11412 Class I hitch is a fit for all models of the 2015 VW Golf and GTI.
If you'll be doing light duty towing with the hitch, you'll also need a trailer wiring harness like # 118646 unless you have a GTI or R model, in which case you'd use # 119250KIT. You'll also need a ball mount like # C45521, a hitch pin like # PC2 and either an # A-80 trailer ball for a 1-7/8 inch or # A-82 for a 2 inch ball.
I'll link to an install video for the hitch that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is Trimming Required On The Draw-Tite Hitch For a 2019 Volkswagen Golf GTI
- Q&A: EcoHitch Stealth Trailer Hitch Receiver # 306-X7375 Tube & Bracket Size
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch for a 2019 Volkswagen Golf Highline
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Spare Tire Recommendation for a 2018 Aluma 548 Trailer
- Q&A: Best Trailer Hitch Receiver for 2019 Volkswagen Golf R
- Article: Trailer Wiring Diagrams
- Q&A: Completely Hidden Trailer Hitch for 2019 VW Golf GTI
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Wiring Installation Instructions for 2008 and Newer Volkswagen Rabbit and GTI