Trailer Hitch Installation - 2015 Volkswagen Golf - Curt Video

There is a trailer hitch receiver that fits your 2019 VW Golf GTI that is completely hidden, the EcoHitch Stealth Trailer Hitch Receiver #306-X7375. If you take a look at the accompanying photo of this hitch installed on a Golf GTI you can see that…

We certainly do! If you live nearby, or will be traveling near the Wentzville MO area, we'd be happy to install a hitch for you. Give our Customer Service folks a call for an appointment or for more details.

The trailer hitch we offer for your 2015 Volkswagen Golf TSI with the best ground clearance is the EcoHitch part #306-X7309 which fits right up to the bottom of the rear bumper fascia. It also does not have a crosstube that hangs down as low as the…

We offer several choices in a 1-1/4-inch Class I trailer hitch for the 2015 Volkswagen Golf TDI that can be seen on the linked page. All of these fit the Golf TDI as long as it is not the R version. The hitch I recommend is the Curt #C11412. This…

We do have a variety of 2-bike racks compatible with a Class I 1-1/4" hitch receiver. Since you have e-Bikes you need to carry this does whittle down the options some but we still have a solution for you. My personal favorite is the Kuat NV 2.0…

For the 2016 Volkswagen Golf GTI we have the Curt hitch part #C11412 that is listed as a fit that would work well. Currently it is the only option for the GTI models so it would be your only option that we offer. I attached an install video for you…

The Curt Trailer Hitch Receiver part #C11412 will fit a 2015 Volkswagen Golf TDI according to my contact at Curt. The reason we do not have any photos of this hitch installed on a TDI model is because the majority of these vehicles have been pulled…

We carry several ball mounts that have a 2 inch rise. I attached a link to a page that has all of them listed. The most popular one we carry for a 1-1/4 inch hitch would be part #C45521 and for a 2 inch hitch part #C45230. We do carry a 2 inch hitch…

I would be happy to help you out. On the CURT Ball Mount, #C45024, from the center of the hitch pin hole to the near end of the ball mount measures 1-1/2 inches. From the center of the ball hole to the back edge of the ball platform towards the car…

Ball mounts including Curt ball mounts #C45024 and #C45014 are given their rating based on how they are tested and which applications they are made for. Other than that and the capacity they are pretty much the same.

On Curt Euro ball mount #C45592 we are measuring from the top of the shank to the point below the ball where it starts to go straight up and down. I have linked a video that should clarify this for you. Curt must be measuring to the top of the ball.

In order to select the correct amount of rise or drop you would need you will need to take a couple measurements. The goal is to have your trailer sit as level as possible. The first thing you will need to do is park your tow vehicle on level ground…