Compatible Cover For A 23' V-Nose Trailer

Question

Question:

Do you know of a cover that will fit my snowmobile v nose 23 ft trailer?

asked by: Bob H

0

Expert Reply:

I recommend going with the Erickson Industrial-Grade Truck/Trailer Tarp Item # EM57051 as we do not offer covers specific for v-nose trailers. This tarp is 14' x 24' long with a 14 x 14 nylon weave and reinforced corners with brass d-rings to secure it down.

expert reply by: Shane H

0

Cover for 23' V-Nose trailer
(click to enlarge)

Answer 1

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work…

view full answer...

Answer 2

For your 6x12 V-Nosed trailer, we have the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46002. This cover will fit trailers 10'1" to 12' long, 106" wide, and 94" tall. Additionally, this cover works…

view full answer...

Answer 3

Being a Kalamazoo/Portage native, I understand the cold and windy Michigan winters you are concerned about. I recommend the Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 18' Long #290-46005 for your V-nose cargo trailer. This cover…

view full answer...

Answer 4

For your V-Nose Enclosed Car Trailer, I recommend the Adco Tyvek Cover part #290-34872 or the Adco AquaShed Cover part #290-52272. The Adco Tyvek will be needed for climates that see any sort of snow accumulation but if not you can save money with…

view full answer...

Answer 5

The cover I recommend for your 28 foot enclosed cargo trailer is the Adco Polypropylene Storage Lot RV Cover #290-74845. This cover is made of a heavy-duty, 4-layer fabric that protects against UV rays, dirt, wind, and snow and is a breathable…

view full answer...

Answer 6

I recommend using the Erickson Industrial-Grade Truck/Trailer Tarp #EM57051 for covering your empty boat trailers. This tarp is 12' wide by 24' long so you will be able to cover the wheels and tires to protect them from UV damage as well.…

view full answer...

Answer 7

Most Malibus are in the 20'-25' length range so the trailer will be slightly longer than that. To best match this the Adco SFS AquaShed Cover for Hi-Lo Travel Trailer part #290-12253 this will work up to 26'. Of course without a boat on…

view full answer...

Answer 8

For your enclosed trailer that measures 28 feet in total length and has a V-nose the Adco RV Cover #AD87ZR would be what I recommend. This is for trailers between 26 and 28 feet in length and the front can be cinched up to better fit the nose of your…

view full answer...

Answer 9

You can use a Truck/Trailer Tarp #EM57051 as we do not have any covers specifically designed for a boat trailer. This tarp is 12' wide by 24' long and uses a tighter weave than general duty tarps so it will last. It has brass eyelets and…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Compatible Cover For A 23' V-Nose Trailer

Product Page this Question was Asked From

Continue Researching