Recommended Cover for 23 Foot Long Enclosed V-Nose Car Trailer

Question

Question:

Hi, Im looking for a trailer cover for a V-nose Car Trailer. The box is 18foot plus it has a 5foot V nose on top of that for a total length of 23 feet. Which cover is recommended?

asked by: Matthew C

0

Expert Reply:

For your V-Nose Enclosed Car Trailer, I recommend the Adco Tyvek Cover part # 290-34872 or the Adco AquaShed Cover part # 290-52272. The Adco Tyvek will be needed for climates that see any sort of snow accumulation but if not you can save money with the Adco AquaShed. These covers both have an opening for the rear ramp so you can load your vehicles into the trailer with the cover still attached and access the side entry door as well.

Please note, the Adco Tyvek Cover also comes with tire covers.

expert reply by: Conner L

0

Answer 1

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 2

Being a Kalamazoo/Portage native, I understand the cold and windy Michigan winters you are concerned about. I recommend the Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 18' Long #290-46005 for your V-nose cargo trailer. This cover has…

view full answer...

Answer 3

For your V-nose enclosed trailer that measures 14 feet in length the Adco SFS AquaShed part #290-46003 is your best option as it's for horse trailers that are 14 feet and have rounded front which is a similar shape to the V-nose you have. This…

view full answer...

Answer 4

The best brand of trailer cover we carry is Adco, the All-Climate Cover or the SFS AquaShed Cover in particular. These covers will both do an excellent job of keeping your trailer protected from the elements. They have polypropylene sides for maximum…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Recommended Cover for 23 Foot Long Enclosed V-Nose Car Trailer

Products Referenced in This Question

Continue Researching