What are the Interior Dimensions of the Inno Box 320?

Question

Question:

Hi, I was hoping to get the exact width of the top of the cargo box. I see that the description shows 71-1/4 x 32 x 10-1/2 but I assume that is the overall dimensions. The top looks to be a bit smaller than that. Hope thats possible as that is my only concern before buying it! Thanks!

asked by: Michael S

0

Expert Reply:

I confirmed with Inno that the width of the Inno Box 320 Rooftop Cargo Box - 9 cu ft - Matte Black # IN94FR not including the length where the box tapers is 26.8 inches. If you are curious about the interior dimensions, I went ahead and attached the dimensions from the manufacturer website to the bottom of this answer.

expert reply by: Bob C

0

Inno Box 320 Rooftop Cargo Box - 9 cu ft - Matte Black # IN94FR
(click to enlarge)

Answer 1

When it comes to installing a trailer hitch onto your 2022 Toyota Venza we do offer three different hitches that are very similar but one of them stands out over the rest. I recommend The etrailer Trailer Hitch Receiver #e25AR because of the matte…

view full answer...

Answer 2

It may be possible that the Draw-Tite #36675 for a 2021 Toyota RAV4 will fit your 2021 Toyota Venza, but this has not been tested so I cannot confirm this. I recommend going with the Curt Trailer Hitch Receiver #C89UR which is confirmed to fit your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

What are the Interior Dimensions of the Inno Box 320?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching