Replacement Wheel Cradles for Old Thule DoubleTrack Pro 9054

Question

Question:

I need to replace the tire cradles on a Thule Double Track Pro 9054 used to transport Mountain bikes. They mount on the cross bar that is slightly larger than 1 and a quarter by 2 and a half inches. Which parts to I need? The cradle is one molded piece that slides on to the mounting bar with a synching strap mechanism built in. I purchased it from E trailer several years ago.

asked by: Daniel B

0

Expert Reply:

The Thule DoubleTrack Pro TH9054 was discontinued by Thule a while ago. We still have limited stock of some of the replacements parts but not all of them. The Replacement Front Wheel Holder for Thule DoubleTrack Pro 2 # 7524600001 is a fit for your bike rack as well as the replacement wheel strap # TH8542378001. We no longer carry the replacement rear cradles though.

expert reply by: Evangeline M

0

Answer 1

The three platform-style hitch bike racks you referenced, the Saris Freedom 2 #SA4412B, the Thule Doubletrack Pro XT #TH92BJ and the Swagman XTC-2 #S64670, differ in a few key features and the nature of your particular bikes may help you determine…

view full answer...

Answer 2

The Thule DoubleTrack Pro XT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount, part #TH92BJ, has a tilt down mast that works even when loaded with bikes. The Thule DoubleTrack does not have a tilt down mast. The clamps on the pro…

view full answer...

Answer 3

The Fat Tire Adapter Kit #TH919 and Locking Ratchet Arm Assembly #752-1272-001 will work if you have the Thule T2 bike rack part TH917XTR or TH916XTR. There have been a few different models of the T2 bike rack so if you can verify that's what you…

view full answer...

Answer 4

For your Thule platform bike rack, the wheel holders/trays you need will depend on your bike rack. It sounds based on your description that you have the original T2 or the T2 Classic which are stock compatible with tires up to 3 inches wide. If you…

view full answer...

Answer 5

You are correct! When someone invests in a carbon fiber bike we automatically assume that they will want to take extra precautions to protect it. This is why we recommend a rack like the Thule T2 Pro 2-Bike Rack, #TH83JV, which uses a ratcheting arm…

view full answer...

Answer 6

The Thule T2 is the older style and the T2 Classic #TH9044-TH9046 and T2 Pro XTR #TH83JV are the newer style. The newer T2 Classic and the pro xtr can accept tires up to 5 inches wide but it does require changing the strap location. I've attached…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Wheel Cradles for Old Thule DoubleTrack Pro 9054

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching